Check for Faults

Language:

The fmadm faulty command displays the list of faults detected by PSH. You can run this command from either the host or through the Oracle ILOM fault management shell.

Log in to Oracle ILOM.
See Log In to Oracle ILOM (Service).

Check for PSH-diagnosed faults.

This example shows how to check for faults through the Oracle ILOM fault management shell.

-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
 
faultmgmtsp> fmadm faulty
------------------- ------------------------------------ -------------- -------
Time                UUID                                 msgid          Severity
------------------- ------------------------------------ -------------- -------
2012-08-27/19:46:26 4ec16c8d-5cdb-c6ca-c949-e24d3637ef27 PCIEX-8000-8R Major
 
Problem Status   : solved
Diag Engine      : [unknown]
System
  Manufacturer   : Oracle Corporation
  Name           : SPARC T5-8
  Part_Number    : 12345678+11+1
  Serial_Number  : 1238BDC0DF
 
----------------------------------------
Suspect 1 of 1
  Fault class  : fault.io.pciex.device-interr-corr
  Certainty    : 100%
  Affects      : hc:///chassis=0/motherboard=0/cpuboard=0/chip=0/hostbridge=0/
                pciexrc=0
 Status       : faulted but still in service
  FRU
     Status      : faulty
     Location    : /SYS/PM0
     Manufacturer      : Oracle Corporation
     Name              : TLA,PN,NRM,T5 1.2
     Part_Number       : 7061001
     Revision          : 01
     Serial_Number     : 465769T+12445102WR
     Chassis
        Manufacturer   : Oracle Corporation
        Name           : SPARC T5-8
        Part_Number    : 12345678+13+2
        Serial_Number  : 1248DC140
 
Description : A fault has been diagnosed by the Host Operation System.
 
Response    : The service required LED on the chassis and on the affected
              FRU may be illuminated.
 
Impact      : No SP impact
 
Action      : Refer to the associated reference document at
              http://support.oracle.com/msg/PCIEX-8000-8R for the latest
              service procedures and policies regarding this diagnosis.
faultmgmtsp>

In this example, a fault is displayed that includes these details:

Date and time of the fault (2012-08-27/19:46:26).

UUID (4e16c8d-5cdb-c6ca-c949-e24d3637ef27), which is unique to each fault.

Message identifier (PCIEX-8000-8R), which can be used to obtain additional fault information from Knowledge Base articles.

Use the message ID to obtain more information about this type of fault.
1. Obtain the message ID from console output.
2. Go to https://support.oracle.com, and search on the message ID in the Knowledge tab.

Follow the suggested actions to repair the fault.

If necessary, clear the fault manually.
See Clear a Fault.

SPARC T5-2 Server Service Manual

Check for Faults

Related Information