|
|
|
|
1 |
Locator LED and button(white) |
|
You can turn on the Locator LED to identify
a particular server. When lit, the LED blinks rapidly. Turn on the
Locator LED by pressing the Locator button, or see Locate the Server. |
2 |
Service Required LED(amber) |
|
The fmadm faulty command
provides details about any faults that cause this indicator to light.
See Check for Faults. Under some fault conditions, individual component fault LEDs
are lit in addition to the Service Required LED. |
3 |
Power OK LED(green) |
|
Indicates these conditions:
Off – Server
is not running in its normal state. Server power might be off. The
SP might be running. Steady on – Server
is powered on and is running in its normal operating state. No service
actions are required. Fast blink – Server
is running in standby mode and can be quickly returned to full function. Slow blink – A
normal but transitory activity is taking place. Slow blinking might
indicate that server diagnostics are running or that the server
is booting.
|
4 |
Power button |
|
|
5 |
System Overtemp LED(amber) |
|
Indicates these conditions:
Off – Indicates
a steady state, no service action is required. Steady on – Indicates
that a temperature failure event has been acknowledged and a service
action is required.
|
6 |
Fan Module Fault LED(amber) |
Rear FM |
Indicates these conditions:
Off – Indicates
a steady state, no service action is required. Steady on – Indicates
that a fan module failure event has been acknowledged and a service
action is required on at least one of the fan modules.
|
7 |
PCIe Card Fault LED(amber) |
Rear PCIe |
Indicates these conditions:
Off – Indicates
a steady state, no service action is required. Steady on – Indicates
that a failure event has been acknowledged and a service action
is required on at least one of the PCIe cards.
|
