|
|
|
|
1 |
AC 0 (left) and AC 1 (right) power LED |
|
Indicates these conditions:
|
2 |
Net MGT port link LED |
|
Indicates these conditions:
|
3 |
Net MGT port speed LED |
|
Indicates these conditions:
|
4 |
Network port link LED |
|
Indicates these conditions:
|
5 |
Network port speed LED |
|
Indicates these conditions:
Off – The
link is operating as a 10-Mbps connection or there is no link.
Amber on – The
link is operating as a 100-Mbps connection.
Green on – The
link is operating as a Gigabit connection (1000 Mbps).
Amber on – The
link is operating as a 100-Mbps connection.
|
6 |
AC 2 (left) and AC 3 (right) power LEDs |
|
Indicates these conditions:
|
7 |
Locator LED and button(white) |
|
Turn on the Locator LED by pressing the
Locator button, or see Locate the Server.
When lit, the LED blinks rapidly. |
8 |
Service Required LED(amber) |
|
The fmadm faulty command
provides details about any faults that cause this indicator to light.
See Check for Faults.
Under some fault conditions, individual component fault LEDs
are lit in addition to the Service Required LED. |
9 |
Power OK LED(green) |
|
Indicates these conditions:
Off – Server
is not running in its normal state. System power might be off. The
SP might be running.
Steady on – Server
is powered on and is running in its normal operating state. No service
actions are required.
Fast blink – Server
is running in standby mode and can be quickly returned to full function.
Slow blink – A
normal but transitory activity is taking place. Slow blinking might
indicate that system diagnostics are running or that the system
is booting.
|
10 |
SP LED |
SP |
Indicates these conditions:
Off – AC
power might have been connected to the power supplies.
Steady on, green – SP
is running in its normal operating state. No service actions are
required.
Blink, green – SP
is initializing the Oracle ILOM firmware.
Steady on, amber – An
SP error has occurred and service is required.
|
11 |
Physical presence button |
|
This button can be used to prove physical
presence in the case of log-in recovery.
Indicates these conditions:
Off – Indicates
a steady state, no service action is required.
Steady on – Indicates
that a temperature failure event has been acknowledged and a service
action is required.
|
12 |
Overtemp LED (amber) |
|
Indicates these conditions:
Off – Indicates
a steady state, no service action is required.
Steady on – Indicates
that a temperature failure event has been acknowledged and a service
action is required.
|