SPARC T5-8 Server Service Manual

Determine Which Power Supply Is Faulty

The following LEDs are lit when a power supply fault is detected:

• System Service Required LEDs on the front panel and rear I/O module

• Fault LED on the faulty power supply

1. Determine if the System Service Required LEDs are lit on the front panel or the rear I/O module.

   See Interpreting LEDs.

2. From the front of the server, check the power supply Fault LEDs to identify which power supply needs to be replaced.

   When the power cord is connected to the server, the associated AC power connector is lit (green), indicating that the power cord is connected to an AC wall socket and is supplying power to the AC power connector.

3. Remove the faulty power supply.

   See Remove a Power Supply.

Related Information

• Remove a Power Supply

• Verify the Power Supply