Unpack the Fabric Interconnect F1-4

The Fabric Interconnect F1-4 is a 2 rack-unit Fabric Interconnect with capacity for 4 I/O modules and either 24 InfiniBand server connections at DDR speeds, or 20 InfiniBand server connections at QDR speeds.

---

Caution  - The Fabric Interconnect chassis weighs 45 - 53 pounds (20 - 24 kilograms) depending on its configuration. Removing the chassis from the shipping container and installing it in an equipment rack requires a minimum of two people. Attempting to unpack and install this system alone could result in equipment damage or personal injury.

---

To unpack the system, you will need the following tools:

• #2 Phillips (cross-head) screwdriver

• Box cutter

  ---

  Note - Because the number and types of I/O modules are determined by the customer, I/O modules are shipped in separate boxes.

  ---

Follow this procedure for unpacking your Fabric Interconnect:

1. Locate the shipping list and verify that the following containers are present:
   • System shipping container
   • I/O module box (1 to 15)
   • HCA box
   • Options box
   • Accessory Kit
   • System information packet
2. Open the containers and verify their contents against the illustration in Unpacking Shipping Containers and Examining Contents.

   Figure 4  Unpacking Shipping Containers and Examining Contents

   
   

   ---

   Note - Although not pictured, a cable management assembly (CMA) is included in a separate box.

   ---

3. Unpack the Fabric Interconnect chassis and place it on a flat, stable surface capable of supporting up to 55 pounds (25 kilograms).