Fabric Interconnect F1-4 Site Criteria

Verify that your installation site meets the following criteria for the Fabric Interconnect F1-4:

• Power: 100-127 / 200-240 VAC 8.5 A at 100 volts or 4 A at 180 volts 50 - 60 Hz 750 W (maximum) with chassis fully loaded

  Each power supply should be connected to a separate 15-20 A AC branch circuit. Do not exceed the maximum power cord length of 15 feet (4.57 m).

  ---

  Caution  -  For the Oracle Fabric Interconnect F1-4 only, input power cords are used as the main AC power disconnect. As a result, the facility power socket outlet shall be installed near the equipment and shall be easily accessible.

  ---

• Environmental: Operating Temperature 5-35℃ Maximum Recommended Operating Temperature (Ambient) 35℃ Relative Humidity (non-condensing) 10-80% at 35℃ Operating Altitude 2000m (maximum)

• Cooling: The front and back of the chassis must be free of any obstruction to the airflow (front-to-back)

  ---

  Caution  - Air vents must not be blocked and must have free access to the room ambient air for cooling. Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.

  ---

• Rack Type: 4-post EIA rack

• Client Servers: InfiniBand interface required

Select a location in the rack in which to install the Oracle Fabric Interconnect. The location must accept a chassis with the following dimensions, as shown in Verifying Rack Space:

• Height: 3 1/2 inches (8.9 cm)

• Weight: 45 lbs. (20.5 Kg) in shipping configuration (no I/O Modules installed) 53 lbs. with I/O modules installed (the fully loaded weight might differ depending on the number and type of modules installed.)

• Width: 17-13/16 inches (45.4 cm)

• Depth: 28-1/4 inches (71.8 cm)

• Service Clearance: 18 inches (45.7 cm) (front and rear)

Figure 2  Verifying Rack Space