Go to primary content
Oracle® Communications EAGLE Database Administration - System Management User's Guide
Release 46.6
E93319 Revision 1
Contents
Previous
Next
List of Figures
1-1 EAGLE Database Partitions (E5-Based Control Cards)
2-1 Removable USB Drive LOCKED
2-2 Removable USB Drive UNLOCKED
2-3 Backup Action on the Fixed Disk
2-4 Making a Backup of the Database on the Fixed Disk
2-5 Making a Backup of the Database to the Removable Cartridge
or Removable Media
2-6 Restore Action on the Fixed Disk
2-7 Restoring the Database from the Backup Partition of the Fixed Disk
2-8 Action of the Repair Procedure
2-9 Repairing the Database
2-10 Action of the Copy Disk Procedure
2-11 Copying the Database from the Active to the Standby Fixed Disk
2-12 Restoring System Data from a Removable Cartridge or Removable Media
2-13 Formatting the Fixed Disk of the Standby E5-TDM
2-14 Formatting Removable Media
3-1 Updating the BLMCAP and OAMHC GPLs
3-2 Updating the Signaling Link and Data Link GPLs
3-3 Updating the Service GPLs
3-4 Updating the Flash GPLs
3-5 Updating the HIPR2 GPL
3-6 Making the Trial Utility GPL the Approved Utility GPL
3-7 Reloading the TDM LCA Clock Bitfile
3-8 Updating the BLIXP GPL
3-9 Updating a High-Capacity Card to Run the BLIXP GPL
4-1 Setting the Clock and Date on the EAGLE 5 ISS
4-2 Changing the Security Defaults
4-3 Configuring the Unauthorized Use Warning Message
4-4 Changing the Security Log Characteristics
4-5 Copying the Security Log to the File Transfer Area
4-6 Adding a User to the System
4-7 Removing a User from the System
4-8 Changing User Information
4-9 Changing a Password
4-10 Changing Terminal Characteristics
4-11 Changing Terminal Command Class Assignments
4-12 Configuring Command Classes
4-13 Adding a Shelf
4-14 Removing a Shelf
4-15 Adding an SS7 LIM
4-16 Removing an SS7 LIM
4-17 Configuring the UIM Threshold
4-18 Removing a UIM Threshold
4-19 Configuring the Measurements Terminal for an EAGLE Containing 700 Signaling Links
4-20 Adding a Measurement Collection and Polling Module (MCPM)
4-21 Removing a MCPM
4-22 Configuring the Measurements Platform Feature
4-23 Adding an FTP Server
4-24 Removing an FTP Server
4-25 Changing an FTP Server
4-26 Adding an E5-IPSM
4-27 Removing an IPSM
4-28 Configuring the Options for the Network Security Enhancements Feature
4-29 Configuring the Restore Device State Option
4-30 Adding an Entry to the Frame Power Alarm Threshold Table
4-31 Removing an Entry from the Frame Power Alarm Threshold Table
4-32 Changing an Entry in the Frame Power Alarm Threshold Table
4-33 Configuring the IMT Bus Alarm Thresholds
4-34 Configuring the Integrated Measurements Feature
5-1 Dual SEAS Terminals with Single CCS MR SEAS Configuration
5-2 Dual SEAS Terminals with Dual CCS MRs SEAS Configuration
5-3 Simplex SEAS Terminal Configuration
5-4 Activating the SEAS over IP Feature
5-5 Performing the Initial SEAS Configuration
5-6 Configuring SEAS Terminals
5-7 Changing the Existing SEAS Configuration
5-8 Turning Off the SEAS Over IP Feature
A-1 Activating Controlled Features
A-2 Activating the EAGLE OA&M IP Security Enhancement Controlled Feature
A-3 Activating the 15 Minute Measurements Controlled Feature
A-4 Clearing a Temporary FAK Alarm
A-5 Deactivating Controlled Features
A-6 Activating the HIPR2 High Rate Mode Feature
A-7 Turning Off the HIPR2 High Rate Mode Feature
B-1 PuTTY Configuration Window - Initial Session Setup
B-2 PuTTY Configuration Window - SSH Connection Setup
B-3 PuTTY Configuration Window - SSH Auth Setup
B-4 PuTTY Configuration Window - SSH Tunnel/Port Forwarding Setup
B-5 PuTTY Configuration Window - SSH Tunnel/Port Forwarding Completion
B-6 Key Acceptance Dialog Box
B-7 PuTTY Login Window
B-8 Logged in Window for SSH Session
B-9 Telnet Connection to Local Host Forwarded Port
C-1 OpenSSH Warning Window
D-1 Backup of the Database to the FTP Server
D-2 Restoring the Database from the FTP Server
D-3 Making a Backup of the Database to the FTP Server
D-4 Restoring the Database from the FTP Server
D-5 Configuring the Archive Build ID Option