pam_winbind - PAM module for Winbind
Edit the PAM system config /etc/pam.d/service and modify it as the following example shows: ... auth required pam_env.so auth sufficient pam_unix2.so +++ auth required pam_winbind.so use_first_pass account requisite pam_unix2.so +++ account required pam_winbind.so use_first_pass +++ password sufficient pam_winbind.so password requisite pam_pwcheck.so cracklib password required pam_unix2.so use_authtok session required pam_unix2.so +++ session required pam_winbind.so ... Make sure that pam_winbind is one of the first modules in the session part. It may retrieve kerberos tickets which are needed by other modules.
PAM_WINBIND(8) 8 PAM_WINBIND(8)
NAME
pam_winbind - PAM module for Winbind
DESCRIPTION
This tool is part of the samba(7) suite.
pam_winbind is a PAM module that can authenticate users against the
local domain by talking to the Winbind daemon.
SYNOPSIS
Edit the PAM system config /etc/pam.d/service and modify it as the
following example shows:
...
auth required pam_env.so
auth sufficient pam_unix2.so
+++ auth required pam_winbind.so use_first_pass
account requisite pam_unix2.so
+++ account required pam_winbind.so use_first_pass
+++ password sufficient pam_winbind.so
password requisite pam_pwcheck.so cracklib
password required pam_unix2.so use_authtok
session required pam_unix2.so
+++ session required pam_winbind.so
...
Make sure that pam_winbind is one of the first modules in the session
part. It may retrieve kerberos tickets which are needed by other
modules.
OPTIONS
pam_winbind supports several options which can either be set in the PAM
configuration files or in the pam_winbind configuration file situated
at /etc/security/pam_winbind.conf. Options from the PAM configuration
file take precedence to those from the configuration file. See
pam_winbind.conf(5) for further details.
debug
Gives debugging output to syslog.
debug_state
Gives detailed PAM state debugging output to syslog.
require_membership_of=[SID or NAME]
If this option is set, pam_winbind will only succeed if the user is
a member of the given SID or NAME. A SID can be either a group-SID,
an alias-SID or even an user-SID. It is also possible to give a
NAME instead of the SID. That name must have the form:
MYDOMAIN\mygroup or MYDOMAIN\myuser (where '\' character
corresponds to the value of winbind separator parameter). It is
also possible to use a UPN in the form user@REALM or group@REALM.
pam_winbind will, in that case, lookup the SID internally. Note
that NAME may not contain any spaces. It is thus recommended to
only use SIDs. You can verify the list of SIDs a user is a member
of with wbinfo --user-sids=SID.
This option must only be specified on a auth module declaration, as
it only operates in conjunction with password authentication.
use_first_pass
By default, pam_winbind tries to get the authentication token from
a previous module. If no token is available it asks the user for
the old password. With this option, pam_winbind aborts with an
error if no authentication token from a previous module is
available.
try_first_pass
Same as the use_first_pass option (previous item), except that if
the primary password is not valid, PAM will prompt for a password.
use_authtok
Set the new password to the one provided by the previously stacked
password module. If this option is not set pam_winbind will ask the
user for the new password.
try_authtok
Same as the use_authtok option (previous item), except that if the
new password is not valid, PAM will prompt for a password.
krb5_auth
pam_winbind can authenticate using Kerberos when winbindd is
talking to an Active Directory domain controller. Kerberos
authentication must be enabled with this parameter. When Kerberos
authentication can not succeed (e.g. due to clock skew), winbindd
will fallback to samlogon authentication over MSRPC. When this
parameter is used in conjunction with winbind refresh tickets,
winbind will keep your Ticket Granting Ticket (TGT) up-to-date by
refreshing it whenever necessary.
krb5_ccache_type=[type]
When pam_winbind is configured to try kerberos authentication by
enabling the krb5_auth option, it can store the retrieved Ticket
Granting Ticket (TGT) in a credential cache. The type of credential
cache can be controlled with this option. The supported values are:
KCM or KEYRING (when supported by the system's Kerberos library and
operating system), FILE and DIR (when the DIR type is supported by
the system's Kerberos library). In case of FILE a credential cache
in the form of /tmp/krb5cc_UID will be created - in case of DIR you
NEED to specify a directory. UID is replaced with the numeric user
id. The UID directory is being created. The path up to the
directory should already exist. Check the details of the Kerberos
implmentation.
When using the KEYRING type, the supported mechanism is
"KEYRING:persistent:UID", which uses the Linux kernel keyring to
store credentials on a per-UID basis. The KEYRING has its
limitations. As it is secure kernel memory, for example bulk sorage
of credentils is for not possible.
When using th KCM type, the supported mechanism is "KCM:UID", which
uses a Kerberos credential manaager to store credentials on a
per-UID basis similar to KEYRING. This is the recommended choice on
latest Linux distributions, offering a Kerberos Credential Manager.
If not we suggest to use KEYRING as those are the most secure and
predictable method.
It is also possible to define custom filepaths and use the "%u"
pattern in order to substitute the numeric user id. Examples:
krb5_ccache_type = DIR:/run/user/%u/krb5cc
This will create a credential cache file in the specified
directory.
krb5_ccache_type = FILE:/tmp/krb5cc_%u
This will create a credential cache file.
Leave empty to just do kerberos authentication without having a
ticket cache after the logon has succeeded. This setting is empty
by default.
cached_login
Winbind allows one to logon using cached credentials when winbind
offline logon is enabled. To use this feature from the PAM module
this option must be set.
silent
Do not emit any messages.
mkhomedir
Create homedirectory for a user on-the-fly, option is valid in PAM
session block.
warn_pwd_expire
Defines number of days before pam_winbind starts to warn about
passwords that are going to expire. Defaults to 14 days.
PAM DATA EXPORTS
This section describes the data exported in the PAM stack which could
be used in other PAM modules.
PAM_WINBIND_HOMEDIR
This is the Windows Home Directory set in the profile tab in the
user settings on the Active Directory Server. This could be a local
path or a directory on a share mapped to a drive.
PAM_WINBIND_LOGONSCRIPT
The path to the logon script which should be executed if a user
logs in. This is normally a relative path to the script stored on
the server.
PAM_WINBIND_LOGONSERVER
This exports the Active Directory server we are authenticating
against. This can be used as a variable later.
PAM_WINBIND_PROFILEPATH
This is the profile path set in the profile tab in the user
settings. Normally the home directory is synced with this directory
on a share.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+-----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+-----------------------+
|Availability | service/network/samba |
+---------------+-----------------------+
|Stability | Volatile |
+---------------+-----------------------+
SEE ALSO
pam_winbind.conf(5), wbinfo(1), winbindd(8), smb.conf(5)
VERSION
This man page is part of version 4.13.17 of Samba.
AUTHOR
The original Samba software and related utilities were created by
Andrew Tridgell. Samba is now developed by the Samba Team as an Open
Source project similar to the way the Linux kernel is developed.
This manpage was written by Jelmer Vernooij and Guenther Deschner.
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from
https://download.samba.org/pub/samba/stable/samba-4.13.17.tar.gz.
Further information about this software can be found on the open source
community website at http://www.samba.org/.
Samba 4.13.17 06/28/2022 PAM_WINBIND(8)