Go to main content

SPARC M8 and SPARC M7 Servers Service Manual

Exit Print View

Updated: September 2017

Switch Unit LEDs

image:Illustration that shows the ECB and switch unit LEDs.
Ready to Remove (blue)
image:Ready-to-remove icon
Indicates that a switch unit can be removed during a hot-service operation.
Service Required LED (amber)
image:Icon for the Service Required LED
Indicates that service is required.
The fmadm faulty command provides details about any faults that cause this indicator to light.
Under some fault conditions, individual component fault LEDs are illuminated in addition to the Service Required LED.
OK LED (green)
image:Icon for the OK LED
Indicates these conditions:
  • Off – System is not running in its normal state. System power might be off. The SP might be running.

  • Steady on – System is powered on and is running in its normal operating state. No service actions are required.

ECB fault (amber)
image:Icon for the Service Required LED
Indicates that a PDECB requires service.

Related Information