SPARC M8 and SPARC M7 Servers Service Manual

Restart the Server or Host (Oracle ILOM)

1. Log in to Oracle ILOM.

   See Log In to Oracle ILOM (Service).

2. Connect to the host console.

   Before starting the server or a specific host, connect to the host console in a separate terminal session to ensure that you can view all messages reported by the system.

   At the Oracle ILOM prompt, type:

   -> start /Servers/PDomains/PDomain_x/HOST/console
   Are you sure you want to start
   /Servers/PDomains/PDomain_x/HOST/console (y/n) ? y
   Starting /Servers/PDomains/PDomain_x/HOST/console

3. Power on the server or a specific domain.

   • To power on all domains, at the Oracle ILOM prompt, type:

     -> start /System

     ---

     Note -  On multidomain servers, if one of the hosts is already running, you cannot use the start /System command. The server will return a message that the target is already started.

     ---

   • To power on a specific domain, at the Oracle ILOM prompt, type:

     -> start /Servers/PDomains/PDomain_x/HOST

4. If you are restarting the host following the replacement of a faulty component, verify that the fault has been resolved.

   See Verify That a Fault Has Been Cleared.

Related Information

• Log In to Oracle ILOM (Service)

• Switch on PDU Circuit Breakers