Go to main content
Index
A
- admin
- changing passwords
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- Admin/User fields
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- alarms
- checkbox
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- description
- Monitor the Enhanced PDU (HTML Interface)
- Monitor the Enhanced PDU (HTML Interface)
- Color Descriptions of PDU Module Measurements
- Current and Voltage Measurement Colors
- out of balanceMonitor an Original PDU (HTML Interface)
- parameter
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- setting
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- SNMP trap descriptions
- Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
- Types of PDU Metering Unit SNMP Traps (Original PDU)
- system log messages
- description
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- enabling
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- ampere measurements
- Monitor the Enhanced PDU (HTML Interface)
- Monitor the Enhanced PDU (LCD Screen)
- Monitor an Original PDU (HTML Interface)
- Monitor an Original PDU (LCD Screen)
- antistatic wrist strap, attaching
- Prepare to Install a Compact PDU
- Prepare to Install a Standard PDU
C
- cable mounting brackets, securing leads toInstall a Standard PDU
- circuit breakers
- capacity, facilityCircuit Breaker Capacity and Characteristics
- positioning on a standard PDUInstall a Standard PDU
- power offConnect the PDU to the AC Power Source
- power onConnect the PDU to the AC Power Source
- resetting after a faultCircuit Breaker Overview
- CLI CommandsUnderstanding CLI Commands
- crossover cable
- diagramCrossover Cable Pinout Diagram
- requirementsPrepare to Connect an Original PDU to a Static IP Address Network
- Current Measurement page
- color description
- Monitor the Enhanced PDU (HTML Interface)
- Current and Voltage Measurement Colors
- connecting PDU to networkConnect an Original PDU to a DHCP Network
- monitoring current
- Monitor the Enhanced PDU (HTML Interface)
- Monitor an Original PDU (HTML Interface)
- current, monitoringMonitor an Original PDU (LCD Screen)
D
- date of manufactureView Module Information (Original PDU)
- Daylight Savings Time, settingSet the PDU System Time
- depth
- compact PDUCompact PDU Physical Dimensions
- standard PDUStandard PDU Physical Specifications
- DHCP Enable checkbox
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- Connect an Original PDU to a DHCP Network
- DHCP network
- connection
- Connect an Enhanced PDU to a DHCP Network
- Connect an Enhanced PDU to a DHCP Network
- Connect an Original PDU to a DHCP Network
- disabling
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- permanently enablingConnect an Original PDU to a DHCP Network
- temporarily enablingConnect an Original PDU to a DHCP Network
- dimensions
- compact PDU
- Compact PDU Electrical Specifications
- Compact PDU Physical Specifications
- Standard PDU Input Leads and Outlet Groups on Three-Phase PDUs
- Standard PDU Input Leads and Outlet Groups on Single-Phase PDUs
- standard PDUStandard PDU Physical Specifications
- dladm commandConfigure an Oracle Solaris System for a Point-to-Point Connection
E
- enhanced PDU
- installingInstalling Standard PDUs
- monitoringMonitoring Enhanced PDUs
- removingRemove a Standard PDU
- specificationsStandard PDU Physical Specifications
- ESD grounding strap
- Prepare to Install a Compact PDU
- Prepare to Install a Standard PDU
- Ethernet
- crossover cable
- Crossover Cable Pinout Diagram
- Prepare to Connect an Original PDU to a Static IP Address Network
- port locationConnect an Enhanced PDU to a DHCP Network
- port, locationConnect an Original PDU to a DHCP Network
F
- facility power
- connecting PDUConnect the PDU to the AC Power Source
- requirementsFacility Power Requirements
- factory-reset buttonRestore the PDU to Factory Default Settings (Original PDU)
- firmware
- downloading new version
- Update the PDU Metering Unit Firmware (SSH)
- Update the PDU Metering Unit Firmware (HTML)
- Update the PDU Metering Unit Firmware (Original PDU)
- information
- View Module Information (Enhanced PDU)
- View Module Information (Enhanced PDU)
- View Module Information (Original PDU)
- standard PDU onlyConnecting Standard PDUs to the Network
- update prompt
- Update the PDU Metering Unit Firmware (HTML)
- Update the PDU Metering Unit Firmware (Original PDU)
- updating
- Update the PDU Metering Unit Firmware (HTML)
- Update the PDU Metering Unit Firmware (Original PDU)
- version
- View Status Information on the LCD Screen (Enhanced PDU)
- View Status Information on the LCD Screen (Original PDU)
- View Module Information (Original PDU)
G
- grounding strap
- attaching
- compact PDUInstall a Compact PDU
- standard PDUAttach a Grounding Strap
- disconnecting
- compact PDURemove a Compact PDU
- standard PDURemove a Standard PDU
- location
- standard PDUAttach a Grounding Strap
H
- high voltage
- compact PDU specificationsCompact PDU Electrical Specifications
- standard PDU specificationsSpecifications for EMEA and APAC High-Voltage PDUs
- HTML interface
- Admin/User fields
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- changing settings
- Changing Interface Settings (Enhanced PDU)
- Changing Interface Settings (Original PDU)
- Current Measurement pageMonitor an Original PDU (HTML Interface)
- factory-reset buttonRestore the PDU to Factory Default Settings (Original PDU)
- Firmware-Update Filename checkbox
- Update the PDU Metering Unit Firmware (HTML)
- Update the PDU Metering Unit Firmware (Original PDU)
- HTTP enable checkbox
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- Login fields
- Access a Metering Unit on the Network (Enhanced PDU)
- Access a Metering Unit on the Network (Original PDU)
- module
- info pageView Module Information (Original PDU)
- information, viewing
- View Module Information (Enhanced PDU)
- View Module Information (Enhanced PDU)
- View Module Information (Original PDU)
- name and location fieldsSet the PDU Name and Location (Original PDU)
- monitoring current
- Monitor the Enhanced PDU (SSH)
- Monitor the Enhanced PDU (RS-232)
- Monitor the Enhanced PDU (HTML Interface)
- Monitor an Original PDU (HTML Interface)
- Net Configuration fields
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- Connect an Original PDU to a DHCP Network
- NMS fieldsSpecify NMS Hosts (Original PDU)
- Param Configuration page
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- SNMP Enable checkbox
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- SNMP settingsEnable and Configure SNMP (Original PDU)
- Syslog fields
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- Trap Host Setup fields
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- HTTP
- enabling through SNMP
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
I
- ifconfig commandConfigure an Oracle Solaris System for a Point-to-Point Connection
- incoming line to neutral voltage, measuringFacility Power Requirements
- input lead cords
- connectingConnect the PDU to the AC Power Source
- length
- compact PDUCompact PDU Physical Dimensions
- standard PDUStandard PDU Physical Specifications
- metering unit relationship
- Relationship Between Metering Unit Inputs and Outlet Groups on Three-Phase
PDUs
- Metering Unit Inputs and Outlet Groups on Single-Phase PDUs
- Relationship Between Metering Unit Modules and Outlet Groups on Three-Phase
PDUs
- Relationship Between Metering Unit Modules and Outlet Groups on Single-Phase
PDUs
- module relationship
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- numbering
- Relationship Between Metering Unit Inputs and Outlet Groups on Three-Phase
PDUs
- Relationship Between Metering Unit Modules and Outlet Groups on Three-Phase
PDUs
- Relationship Between Metering Unit Modules and Outlet Groups on Single-Phase
PDUs
- outlet group relationship
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- power source, disconnecting
- Remove a Compact PDU
- Remove a Standard PDU
- routing
- compact PDUInstall a Compact PDU
- standard PDUInstall a Standard PDU
- input relationship
- Relationship Between Inputs and Outlet GroupsUnderstanding the Relationship Between Inputs and Outlet Groups
- installation task overview (Compact PDU)Task Installation Overview (Compact PDU)
- installation task overview (Standard PDU)Task Installation Overview (Standard PDU)
- installing
- compact PDU
- Install a Compact PDU
- Tools (Compact PDU)
- standard PDUTools (Standard PDU)
- IP address
- View Status Information on the LCD Screen (Enhanced PDU)
- View Status Information on the LCD Screen (Original PDU)
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- Connect an Original PDU to a DHCP Network
J
- jumper cords
- avoiding overloading circuitConnect Equipment Power Cords to PDUs
- disconnecting
- Remove a Compact PDU
- Remove a Standard PDU
- symmetrical loadConnect Equipment Power Cords to PDUs
L
- LCD screen
- background, changing
- Adjust the LCD Screen (Enhanced PDU)
- Adjust the LCD Screen (Original PDU)
- messages, understanding
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- module and outlet relationship
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- monitoring currentMonitor an Original PDU (LCD Screen)
- reading
- Monitor the Enhanced PDU (LCD Screen)
- Monitor an Original PDU (LCD Screen)
- resetting metering unit
- Reset the Enhanced PDU Metering Unit (Reset Button)
- Reset the PDU Metering Unit (Original PDU)
- rotating
- Adjust the LCD Screen (Enhanced PDU)
- Adjust the LCD Screen (Original PDU)
- status message
- View Status Information on the LCD Screen (Enhanced PDU)
- View Status Information on the LCD Screen (Original PDU)
- length
- compact PDUCompact PDU Physical Dimensions
- standard PDUStandard PDU Physical Specifications
- lifting standard PDUInstall a Standard PDU
- login prompt
- admin user
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Values (Enhanced PDU)
- Login Information
- defined
- Access a Metering Unit on the Network (Enhanced PDU)
- Access a Metering Unit on the Network (Original PDU)
- usersLogin Information
- low voltage
- compact PDU specificationsCompact PDU Electrical Specifications
- standard PDU specifications
- Specifications for EMEA and APAC High-Voltage PDUs
- Confirming PDU Specifications
M
- MAC address
- View Status Information on the LCD Screen (Enhanced PDU)
- View Status Information on the LCD Screen (Original PDU)
- View Module Information (Original PDU)
- messages
- SNMP traps
- Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
- Types of PDU Metering Unit SNMP Traps (Original PDU)
- syslog messages
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- understanding
- Monitor the Enhanced PDU (HTML Interface)
- Relationship Between Inputs and Outlet Groups Overview
- Current and Voltage Measurement Colors
- Relationship Between Modules and Outlet Groups Overview
- metering unit
- adding users
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- changing passwords
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- Current Measurement pageConnect an Original PDU to a DHCP Network
- Ethernet port
- Connect an Enhanced PDU to a DHCP Network
- Connect an Original PDU to a DHCP Network
- firmware
- information
- View Module Information (Enhanced PDU)
- View Module Information (Enhanced PDU)
- View Module Information (Original PDU)
- updating
- Update the PDU Metering Unit Firmware (HTML)
- Update the PDU Metering Unit Firmware (Original PDU)
- HTML interface
- Monitor the Enhanced PDU (SSH)
- Monitor the Enhanced PDU (RS-232)
- Monitor the Enhanced PDU (HTML Interface)
- Monitor an Original PDU (HTML Interface)
- IP address
- View Status Information on the LCD Screen (Enhanced PDU)
- View Status Information on the LCD Screen (Original PDU)
- LCD screenMonitor an Original PDU (LCD Screen)
- log into
- Access a Metering Unit on the Network (Enhanced PDU)
- Access a Metering Unit on the Network (Original PDU)
- login prompt
- Access a Metering Unit on the Network (Enhanced PDU)
- Access a Metering Unit on the Network (Original PDU)
- module
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- module and phase relationship
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- monitoring
- Restore the PDU to Factory Default Settings (HTML)
- Monitoring Enhanced PDUs
- Restore the PDU to Factory Default Settings (Original PDU)
- Monitoring Original PDUs
- incoming line to neutral voltageFacility Power Requirements
- naming
- Set the PDU Information (Enhanced PDU)
- Set the PDU Name and Location (Original PDU)
- network accessAccess a Metering Unit on the Network (Original PDU)
- network connection
- DHCP IP address
- Connect an Enhanced PDU to a DHCP Network
- Connect an Enhanced PDU to a DHCP Network
- Connect an Original PDU to a DHCP Network
- introducedConnecting Standard PDUs to the Network
- static IP addressPrepare to Connect an Original PDU to a Static IP Address Network
- NMS hosts, settingSpecify NMS Hosts (Original PDU)
- outlet group
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- Param Configuration page
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- phase
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- Reset buttonConnect an Original PDU to a DHCP Network
- resetting
- Reset the Enhanced PDU Metering Unit (Reset Button)
- Reset the PDU Metering Unit (Original PDU)
- restore default settings
- Restoring the PDU to Factory Default Settings (Enhanced PDU)
- Restore the PDU to Factory Default Settings (Original PDU)
- SNMP
- configuring
- Enabling and Configuring SNMP (Enhanced PDU)
- Enabling and Configuring SNMP (Original PDU)
- enabling
- Enabling and Configuring SNMP (Enhanced PDU)
- Enabling and Configuring SNMP (Original PDU)
- traps
- Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
- Types of PDU Metering Unit SNMP Traps (Original PDU)
- static IP address network connectionConnect an Original PDU to a Static IP Address Network
- syslog messages
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- thresholds, settingSet Threshold Parameter Levels (Original PDU)
- time, settingSet the PDU System Time
- module
- alarms, setting
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- defined
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- monitoring
- Monitor the Enhanced PDU (HTML Interface)
- Monitor an Original PDU (HTML Interface)
- parameters, setting
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- relationship with phases and groups
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- Module Info pageView Module Information (Original PDU)
- Module Name & Location fields
- Set the PDU Information (Enhanced PDU)
- Set the PDU Name and Location (Original PDU)
- monitoring
- LCD screen
- Monitor the Enhanced PDU (LCD Screen)
- Monitor an Original PDU (LCD Screen)
- metering unit phase
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- module
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- network connection
- DHCP IP address
- Connect an Enhanced PDU to a DHCP Network
- Connect an Enhanced PDU to a DHCP Network
- Connect an Original PDU to a DHCP Network
- establishing
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Enhanced PDU to a Static IP Address Network Through a SER MGT
Port
- Connect an Original PDU to a Static IP Address Network
- Connecting Standard PDUs to the Network
- static IP addressPrepare to Connect an Original PDU to a Static IP Address Network
- phase
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- standard PDU onlyConnecting Standard PDUs to the Network
N
- naming PDU
- Set the PDU Information (Enhanced PDU)
- Set the PDU Name and Location (Original PDU)
- Net Configuration page
- Admin/User fields
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- enabling DHCPConnect an Original PDU to a DHCP Network
- factory-reset button
- Restore the PDU to Factory Default Settings (HTML)
- Access the Event Logging Page
- Set the PDU System Time
- Reboot the Enhanced PDU Metering Unit (HTML)
- Restore the PDU to Factory Default Settings (Original PDU)
- firmware-update
- Update the PDU Metering Unit Firmware (HTML)
- Update the PDU Metering Unit Firmware (Original PDU)
- HTTP Enable checkboxEnable and Configure SNMP (Original PDU)
- module name & location
- Set the PDU Information (Enhanced PDU)
- Set the PDU Name and Location (Original PDU)
- NMSSpecify NMS Hosts (Original PDU)
- SNMP enable checkboxEnable and Configure SNMP (Original PDU)
- static IP address network
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- syslog fields
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- trap host setup
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- network configuration
- DHCP
- disabling
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- enablingConnect an Original PDU to a DHCP Network
- page
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- Connect an Original PDU to a DHCP Network
- static IP addressConnect an Original PDU to a Static IP Address Network
- network connection
- DHCP
- Connect an Enhanced PDU to a DHCP Network
- Connect an Enhanced PDU to a DHCP Network
- Connect an Original PDU to a DHCP Network
- establishing
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Enhanced PDU to a Static IP Address Network Through a SER MGT
Port
- Connecting an Enhanced PDU to a Network
- Connect an Original PDU to a Static IP Address Network
- Connecting an Original PDU to a Network
- static IP addressPrepare to Connect an Original PDU to a Static IP Address Network
- network management stationSpecify NMS Hosts (Original PDU)
- NMS hostsSpecify NMS Hosts (Original PDU)
O
- operating temperature rangeEnvironmental Specifications
- Oracle Solaris system, point-to-point connectionConfigure an Oracle Solaris System for a Point-to-Point Connection
- original PDU
- installingInstalling Standard PDUs
- monitoringMonitoring Original PDUs
- removing Refer to the service manuals of the equipment installed in the rack for the proper PDU replacement procedures, if applicable.Remove a Standard PDU
- specificationsStandard PDU Physical Specifications
- out of balance
- alarm message
- Current and Voltage Measurement Colors
- Monitor an Original PDU (HTML Interface)
- description
- Monitor the Enhanced PDU (HTML Interface)
- Set Threshold Parameter Values (Enhanced PDU)
- Current and Voltage Measurement Colors
- Set Threshold Parameter Levels (Original PDU)
- parameter
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- Set Threshold Parameter Levels (Original PDU)
- SNMP trap
- Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
- Types of PDU Metering Unit SNMP Traps (Original PDU)
- outlet groups
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- incoming line to neutral voltage, measuringFacility Power Requirements
- metering unit module relationship
- single-phase PDUsRelationship Between Metering Unit Modules and Outlet Groups on Single-Phase
PDUs
- three-phase PDUs
- Relationship Between Metering Unit Inputs and Outlet Groups on Three-Phase
PDUs
- Relationship Between Metering Unit Modules and Outlet Groups on Three-Phase
PDUs
- outlet type and number
- compact PDUCompact PDU Power Specifications
- standard PDU
- Specifications for EMEA and APAC High-Voltage PDUs
- Specifications for North and South America, Japan, and Taiwan Low-Voltage
PDUs
P
- Param Configuration page
- Set Threshold Parameter Values (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- Set Threshold Parameter Levels (Original PDU)
- parameter
- info lowSet Threshold Parameter Values (Enhanced PDU)
- Parameter Configuration pageSet Threshold Parameter Values (Enhanced PDU)
- parameters
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- Set Threshold Parameter Levels (Original PDU)
- Set Threshold Parameter Levels (Original PDU)
- monitoringMonitor an Original PDU (HTML Interface)
- out of balanceSet Threshold Parameter Levels (Original PDU)
- SNMP
- Configure SNMP Traps
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- part numberView Module Information (Original PDU)
- Password field
- Access a Metering Unit on the Network (Enhanced PDU)
- Access a Metering Unit on the Network (Original PDU)
- passwords
- assigning
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- changing
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- patch cable
- Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
- Connect an Original PDU to a Static IP Address Network
- Prepare to Connect an Original PDU to a Static IP Address Network
- PC, configuring point-to-point connectionConfigure a Windows PC for a Point-to-Point Connection
- PDU
- antistatic strap, attaching
- Prepare to Install a Compact PDU
- Prepare to Install a Standard PDU
- compact
- grounding strap, attachingInstall a Compact PDU
- high-voltageCompact PDU Electrical Specifications
- installingTools (Compact PDU)
- low-voltageCompact PDU Electrical Specifications
- mounting brackets
- Mounting Bracket Screw and Spring Nut Locations
- Prepare to Install a Compact PDU
- mounting screw locationsMounting Bracket Screw and Spring Nut Locations
- rack template
- Mounting Bracket Screw and Spring Nut Locations
- Prepare to Install a Compact PDU
- removing for serviceRemove a Compact PDU
- specifications
- Compact PDU Electrical Specifications
- Compact PDU Physical Specifications
- Standard PDU Input Leads and Outlet Groups on Three-Phase PDUs
- Standard PDU Input Leads and Outlet Groups on Single-Phase PDUs
- date of manufactureView Module Information (Original PDU)
- input lead cords
- connectingConnect the PDU to the AC Power Source
- routing from compact PDUInstall a Compact PDU
- routing from standard PDUInstall a Standard PDU
- jumper cords
- routingConnect Equipment Power Cords to PDUs
- LCD screen
- Administering the PDU Metering Unit (Enhanced PDU)
- Administering the PDU Metering Unit (Original PDU)
- MAC address
- View Status Information on the LCD Screen (Enhanced PDU)
- View Status Information on the LCD Screen (Original PDU)
- monitoring
- Restore the PDU to Factory Default Settings (HTML)
- Monitoring Enhanced PDUs
- Restore the PDU to Factory Default Settings (Original PDU)
- Monitoring Original PDUs
- naming
- Set the PDU Information (Enhanced PDU)
- Set the PDU Name and Location (Original PDU)
- network connection
- DHCP IP address
- Connect an Enhanced PDU to a DHCP Network
- Connect an Original PDU to a DHCP Network
- establishingConnecting Standard PDUs to the Network
- static IP addressPrepare to Connect an Original PDU to a Static IP Address Network
- part numberView Module Information (Original PDU)
- resetting
- Reset the Enhanced PDU Metering Unit (Reset Button)
- Reset the PDU Metering Unit (Original PDU)
- restore default settings
- Restoring the PDU to Factory Default Settings (Enhanced PDU)
- Restore the PDU to Factory Default Settings (Original PDU)
- safety noticesSafety Notices
- serial numberView Module Information (Original PDU)
- shipping screws, removing from standard PDURemove a Standard PDU
- standard
- cable mounting bracketsInstall a Standard PDU
- grounding strap, attachingAttach a Grounding Strap
- installingTools (Standard PDU)
- liftingInstall a Standard PDU
- low-voltageConfirming PDU Specifications
- mounting bracketsPrepare to Install a Standard PDU
- removing for serviceRemove a Standard PDU
- tie-wraps, securing to cable routing bracketInstall a Standard PDU
- phase
- alarms, setting
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- defined
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- metering unit group relationship
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- metering unit module relationship
- Relationship Between Inputs and Outlet Groups Overview
- Relationship Between Modules and Outlet Groups Overview
- thresholds, setting
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- pinouts, SER MGT portSER MGT Ports and Pin Descriptions
- point-to-point connection
- crossover cable diagramCrossover Cable Pinout Diagram
- Oracle Solaris system, configuringConfigure an Oracle Solaris System for a Point-to-Point Connection
- PC, configuringConfigure a Windows PC for a Point-to-Point Connection
- port, Ethernet
- Connect an Enhanced PDU to a DHCP Network
- Connect an Original PDU to a DHCP Network
- power distribution unit See PDU
- power input lead cords See input lead cords
- PreWarningHigh-Trap descriptionTypes of PDU Metering Unit SNMP Traps (Enhanced PDU)
R
- rack template
- Mounting Bracket Screw and Spring Nut Locations
- Prepare to Install a Compact PDU
- receptacle type
- compact PDUCompact PDU Power Specifications
- standard PDU
- Specifications for EMEA and APAC High-Voltage PDUs
- Specifications for North and South America, Japan, and Taiwan Low-Voltage
PDUs
- requirements
- circuit breaker capacity, facilityCircuit Breaker Capacity and Characteristics
- facility powerFacility Power Requirements
- groundingGrounding Requirements
- reset button
- cycling through modules
- Monitor the Enhanced PDU (LCD Screen)
- Monitor an Original PDU (LCD Screen)
- powering on PDUConnect an Original PDU to a DHCP Network
- resetting metering unit
- Reset the Enhanced PDU Metering Unit (Reset Button)
- Reset the PDU Metering Unit (Original PDU)
- resetting
- circuit breakersCircuit Breaker Overview
- metering unit
- Reset the Enhanced PDU Metering Unit (Reset Button)
- Reset the PDU Metering Unit (Original PDU)
- restore default settings
- Restoring the PDU to Factory Default Settings (Enhanced PDU)
- Restore the PDU to Factory Default Settings (Original PDU)
- ReturnToNormal-Trapdescription
- Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
- Types of PDU Metering Unit SNMP Traps (Original PDU)
- routing input lead cords
- compact PDUInstall a Compact PDU
- standard PDUInstall a Standard PDU
S
- safety noticesSafety Notices
- SER MGT port pinoutsSER MGT Ports and Pin Descriptions
- serial numberView Module Information (Original PDU)
- service
- circuit breakers, resettingCircuit Breaker Overview
- shipping screws
- standard PDU
- installingInstall a Standard PDU
- removingRemove a Standard PDU
- SNMP
- community name
- Specify NMS Hosts (Original PDU)
- Enable and Configure SNMP (Original PDU)
- disabling
- Configure SNMP Traps
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- Enable checkboxEnable and Configure SNMP (Original PDU)
- enabling
- Configure SNMP Traps
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- enabling per module
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- host IP addressesEnable and Configure SNMP (Original PDU)
- host setup
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- NMS hosts, settingSpecify NMS Hosts (Original PDU)
- parameter settings
- Configure SNMP Traps
- Enable and Configure SNMP (Enhanced PDU)
- Enable and Configure SNMP (Original PDU)
- setting trap values
- Configure SNMP Traps
- Enable and Configure SNMP (Original PDU)
- trap descriptions
- Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
- Types of PDU Metering Unit SNMP Traps (Original PDU)
- trap host setupEnable and Configure SNMP (Original PDU)
- specifications
- compact PDUCompact PDU Physical Specifications
- environmentalEnvironmental Specifications
- standard PDUSpecifications for EMEA and APAC High-Voltage PDUs
- spring nuts, insertingPrepare to Install a Compact PDU
- static IP address
- network configurationConnect an Original PDU to a Static IP Address Network
- network connectionPrepare to Connect an Original PDU to a Static IP Address Network
- syslog
- Enable checkbox
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- messages
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- enabling
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- example
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- setting parameters
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- setting time between messages
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- system log
- Alarms checkbox
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- messages
- enabling
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- example
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
- parameters, settingSend System Log Messages to Systems on the Network (Original PDU)
- time between messages, setting
- Send System Log Messages to Systems on the Network (Enhanced PDU)
- Send System Log Messages to Systems on the Network (Original PDU)
T
- temperature, operating rangeEnvironmental Specifications
- thresholds, setting
- Set Threshold Parameter Values (Enhanced PDU)
- Set Threshold Parameter Levels (Original PDU)
- tie-wrapsInstall a Standard PDU
- time, settingSet the PDU System Time
- tools, assembling
- Tools (Compact PDU)
- Tools (Standard PDU)
- traps
- described
- Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
- Types of PDU Metering Unit SNMP Traps (Original PDU)
- KeepAlive trap
- Configure SNMP Traps
- Enable and Configure SNMP (Original PDU)
- setting
- Configure SNMP Traps
- Enable and Configure SNMP (Original PDU)
- trap host setupEnable and Configure SNMP (Original PDU)
U
- unpacking
- compact PDU
- Prepare to Install a Compact PDU
- Prepare to Install a Compact PDU
- standard PDUPrepare to Install a Standard PDU
- users
- adding
- Add Users and Change Passwords (Enhanced PDU)
- Add Users and Change Passwords (Original PDU)
- Add Users and Change Passwords (Original PDU)
- changing passwordsAdd Users and Change Passwords (Original PDU)
- login field
- Access a Metering Unit on the Network (Enhanced PDU)
- Access a Metering Unit on the Network (Original PDU)
V
- voltage
- compact PDU
- high voltageCompact PDU Power Specifications
- low voltageCompact PDU Power Specifications
- standard PDU
- high voltageSpecifications for EMEA and APAC High-Voltage PDUs
- low voltageSpecifications for North and South America, Japan, and Taiwan Low-Voltage
PDUs
W
- weight
- compact PDUCompact PDU Physical Dimensions
- standard PDUStandard PDU Physical Specifications
- width
- compact PDUCompact PDU Physical Dimensions
- standard PDUStandard PDU Physical Specifications