Install a Compact PDU
-
Insert the PDU's standoff bolts into the side mounting bracket's keyhole
slots.
Press down on the top of the PDU to ensure that the PDU rests securely in the side mounting bracket.
- Using a T-25 Torx wrench key, secure the top mounting bracket to the rack by tightening an M5 screw with a washer to the spring nut you installed in Prepare to Install a Compact PDU.
- Using a T-25 Torx wrench key, secure the grounding strap to the PDU with a screw and a washer.
- Insert a spring nut into the rack frame channel parallel to the PDU, approximately in the middle of the PDU.
-
Using a T-25 Torx wrench key, secure the grounding strap
connector to the
spring nut with a screw and a washer.
- Connect the loose end of the PDU grounding strap to the connector you installed in the rack frame.
-
Route the power input lead cords between the rear RETMA rail and the side
panel.
A PDU has one power input lead cord, which you must route between the side panel and the rear RETMA rail.
Route the power input lead cord either down through the bottom of the rack, or up through the top of the rack, depending on where you plan to connect them to the main power source.
If you are routing the cables through the bottom of the rack, refer to the Sun Rack II User's Guide for the dimensions of the floor cutout.
Routing Compact PDU cables through the bottom of the rack.
Routing Compact PDU cables Up through the top of the rack.
