Go to main content

Sun Rack II Power Distribution Units User's Guide

Exit Print View

Updated: September 2020

Set the PDU Name and Location (Original PDU)

It is a good practice to name the PDU you are monitoring, especially if your network contains multiple racks and PDUs. Besides the name, you can set the location of the PDU as well. When set, the name and location are displayed on the top of each HTML page.

  1. Access the PDU metering unit from a system on the network.

    See Access a Metering Unit on the Network (Original PDU).

  2. Click on the Net Configuration link and log in as an admin user.

    You are prompted to log in as an admin user. By default, both the admin user name and password is admin.

  3. Scroll down the page until you see the Module Name & Location fields.
  4. Provide a name and a location for the PDU.

    A name and location cannot be more than 15 characters.

    image:Figure showing how to set the name and location of the                                 PDU.
  5. Click the Submit button to set the PDU name and location.
  6. Click your web browser Reload or Refresh button to view the updated PDU name and location.