Display Power Information for HCAs (Oracle ILOM CLI)

The switch has internal HCAs for EDR connectivity. You can display the power consumption for each type of power the HCA uses as well as event thresholds for power supplied to the HCAs.

1. Display the .85-volt power supplied to the HCA.

   -> show /SYS/MB/V_+0V85_HCA
   	Properties:
           	type = Voltage
           	ipmi_name = MB/V_+0V85_HCA
           	class = Threshold Sensor
           	value = 0.847 Volts
           	upper_nonrecov_threshold = 0.941 Volts
           	upper_critical_threshold = 0.931 Volts
           	upper_noncritical_threshold = 0.921 Volts
           	lower_noncritical_threshold = 0.833 Volts
           	lower_critical_threshold = 0.823 Volts
           	lower_nonrecov_threshold = 0.813 Volts
           	alarm_status = cleared
   
   ->

2. Display the 1.05-volt power supplied to the HCA.

   -> show /SYS/MB/V_+1V05_HCA
   
   /SYS/MB/V_+1V05_
   	Properties:
           	type = Voltage
           	ipmi_name = MB/V_+1V05_HCA
           	class = Threshold Sensor
           	value = 1.091 Volts
           	upper_nonrecov_threshold = 1.137 Volts
           	upper_critical_threshold = 1.127 Volts
           	upper_noncritical_threshold = 1.117 Volts
           	lower_noncritical_threshold = 1.019 Volts
           	lower_critical_threshold = 1.000 Volts
           	lower_nonrecov_threshold = 0.980 Volts
           	alarm_status = cleared
   
   -> 
   

Related Information

• Display Power Information for the IB Switch Chip (Oracle ILOM CLI)

• Display the MBOM Power Information (Oracle ILOM CLI)