Set Network Management Properties (Oracle ILOM Web)

The switch's network management interface can be either IPv4 or IPv6. Use this task to set the networking properties for the switch's network management interface.

1. Choose ILOM Administration→Connectivity, and click the Network tab.
2. Select Enabled for the 802.1Q VLAN Tagging checkbox if you want the switch to support VLANs.
3. Type the VLAN ID range that the switch can transmit and receive.
4. Configure the protocol-specific properties.

   See Set the Switch's IPv4 Management Network Properties (Oracle ILOM Web) and Set the Switch's IPv6 Management Network Properties (Oracle ILOM Web).

   ---

   Note -  Both protocols can run on the same switch.

   ---

5. Click Save.

Related Information

• Set the Network Management Parameters (Oracle ILOM Web)

• Set the Switch's IPv4 Management Network Properties (Oracle ILOM Web)

• Set the Switch's IPv4 Management Network Dynamic Addresses (Oracle ILOM Web)

• Set the Switch's IPv6 Management Network Properties (Oracle ILOM Web)

• Test the Management Network Configuration (Oracle ILOM Web)

• Display the Management Network Configuration (Oracle ILOM Web)

• Display the System-Level Health of Management Networking (Oracle ILOM Web)