Display Faulted System Components (Oracle ILOM CLI)

The switch adds any faulted targets to the faultmgt target, which you can query. If the switch sends a notification of an error, of if you suspect the switch hardware is having a problem, use this task to check for any faulted components.

1. Display any faulted components.

   -> show -d targets /SP/faultmgmt/x
    /SP/faultmgmt
    	Targets:
   		x (faulted_target)
   ->
   

   where:

   • x is the target sequence number (starting at 0).

   • faulted_target is the Oracle ILOM target of the faulted component.

   ---

   Note -  If there are several faulted components, then their respective targets are listed with increasing target sequence numbers.

   ---

   ---

   Note -  If no number is displayed, there are no faulted components.

   ---

   For example, type:

   -> show -d targets /SP/faultmgmt
    /SP/faultmgmt
    	Targets:
    		0 (/SYS/PS0)
   ->
   

2. Display details of the fault.

   -> show -d properties /SP/faultmgmt/x/faults/y
   

   where:

   • x is the target sequence number (starting at 0).

   • y is the fault sequence number (starting at 0) for the target x.

   For example, type:

   -> show /SP/faultmgmt/0/faults/0
    /SP/faultmgmt/0/faults/0
    	Properties:
    		class = fault.chassis.tli.invalid
           	sunw-msg-id = ILOM-8000-30
           	component = /SYS
           	uuid = f431abc4-192d-41c0-dc0a-feff5e043ec3
           	timestamp = 2000-11-24/19:27:44
           	fru_serial_number = unknown
           	fru_part_number = unknown
           	fru_name = unknown
           	fru_manufacturer = Oracle Corporation
           	system_component_manufacturer = Oracle Corporation
           	system_component_name = unknown
           	system_component_part_number = unknown
           	system_component_serial_number = unknown
           	chassis_manufacturer = Oracle Corporation
           	chassis_name = unknown
           	chassis_part_number = unknown
           	chassis_serial_number = unknown
   
   ->
   

   The class property provides a general reason for the fault.

   ---

   Note -  For more fault information, refer to the detecting and managing faults topic in your switch's service manual.

   ---

Related Information

• Check for Open Problems (Oracle ILOM CLI)

• Display Switch Health (Oracle ILOM CLI)

• Display the Switch Uptime (Oracle ILOM CLI)

• Display the Oracle ILOM Audit Log (Oracle ILOM CLI)

• Display the Oracle ILOM Event Log (Oracle ILOM CLI)

• Display Module Faults (Oracle ILOM CLI)