Controlling I/O Modules (Oracle ILOM CLI)

The virtualization switch contains I/O modules to customize connectivity in your datacenter. For information about the modules, refer to the user's guide for the appropriate module. User's guides are available at: http://www.oracle.com/goto/f2-io-mod/docs.

Module slots in the virtualization switch are numbered from 0 to 11. Module 0 is the module in the leftmost physical slot in the virtualization switch.

Through Oracle ILOM, you can control individual modules only. You cannot control individual properties of the module. The /SYS/MODULES/MODULEX target controls the I/O modules in the virtualization switch.

These topics describe how to control the virtualization switch's I/O modules:

• Stop a Module (Oracle ILOM CLI)

• Start a Module (Oracle ILOM CLI)

• Clear Module Faults (Oracle ILOM CLI)

• Reset a Module (Oracle ILOM CLI)

Related Information

• Oracle ILOM Module Targets Overview

• Display Module Type (Oracle ILOM CLI)

• Display Module Power Information (Oracle ILOM CLI)

• Display Module Temperatures (Oracle ILOM CLI)

• Display Module Faults (Oracle ILOM CLI)

• Display Module FRU Information (Oracle ILOM CLI)