Oracle^® Rack Universal Power Distribution Unit User's Guide

Log In to CLI with HyperTerminal

HyperTerminal is part of the Windows operating systems before Windows Vista. If a security login agreement is enabled, you must accept the agreement to complete the login. Users are authenticated first and the security banner is verified afterward. You can use any terminal emulation programs for local access to the command line interface.

1. Connect your computer to the HPDU through a local (USB or RS-232) connection.
2. Launch HyperTerminal on your computer and open a console window. When the window first opens, it is blank.
3. Verify that the COM port settings use the following configuration:

   • Bits per second = 115200 (115.2Kbps)

   • Data bits = 8

   • Stop bits = 1

   • Parity = None

   • Flow control = None

   ---

   Note -  For a USB connection, you can determine the COM port by choosing Control Panel → System → Hardware → Device Manager, and locating Dominion PX2 Serial Console in the Ports group.

   ---

4. In the communications program, press Enter to send a carriage return to the HPDU.
5. When prompted, type a name (case sensitive) and press Enter.
6. When prompted, type a password (case sensitive) and press Enter.

   The # or > system prompt appears. You are now logged in to the command line interface and can begin administering the HPDU.

   ---

   Note -  The Last Login information, including the date and time, also displays if the same user account was used to log in to this HPDU web interface or CLI.

   ---