After selecting the static IP configuration mode, to assign a permanent IP
address to the HPDU device, at the config:# prompt, type network
ipv4 interface <ETH> address <ip address> or
network ipv6 interface <ETH> address <ip
address>/xx, and press Enter.
<ip address> is the IP address being assigned to your HPDU device. The
IP address format is IP address/prefix. For example,
192.168.84.99/24.
/xx indicates a prefix length of bits such as /64 for IPv6 only.
Interface
Description
ethernet
(PDU)
Determine the IPv4 or IPv6 address of the ETHERNET
interface (wired networking).
eth1
(PDU -iX7)
Determine the IPv4 or IPv6 address of the ETH1
interface (wired networking).
eth2
(PDU -iX7)
Determine the IPv4 or IPv6 address of the ETH2
interface (wired networking).
bridge
Determine the IPv4 or IPv6 address of the Bridge
interface (Bridging mode).