Oracle^® Rack Universal Power Distribution Unit User's Guide

Set the Baud Rates

You can set the baud rate (bps) of the serial port labeled CONSOLE/MODEM on the HPDU device. Change the baud rate before connecting it to a device, such as a computer or a modem, through the serial port, or communications errors occur. If you change the baud rate dynamically after the connection is made, reset the HPDU or power cycle the connected device for proper communications.

1. To determine the console baud rate, at the config:# prompt, type serial consoleBaudRate <baud_rate>, and press Enter.
2. To determine the modem baud rate, at the config:# prompt, type serial modemBaudRate <baud_rate>, and press Enter.

   <baud_rate> is one of the baud rate options:

   • 1200

   • 2400

   • 4800

   • 9600

   • 19200

   • 38400

   • 57600

   • 115200