Modify Device Configuration (Legacy Boot Mode)

You invoke the I/O adapter utilities during BIOS POST progression using hot keys that are identified by the adapter's option ROM during POST. When you press the hot key, the adapter's specific configuration utility interface is displayed.

1. Access the server from one of these interfaces.
   • Log in to the Oracle ILOM web interface and access the Remote Console. See Log In To the Oracle ILOM Web Interface and Access the Remote Console (Web Interface).
   • Log in to the Oracle ILOM CLI and access the host console. See Log In To the Oracle ILOM CLI (NET MGT) and Switch Between the Oracle ILOM CLI and the Host Console.
2. Reset or power on the server.

   See Controlling the Power State.

   The BIOS begins to boot and run POST.

3. When prompted, enter the hot key for the device you want to configure.

   The device's configuration utility is displayed.

   ---

   Note -  The utility's interface is a vendor-specific design.

   ---

4. Configure the device according to the utility invoked.

Related Information

• Server OS Installation, setting up BIOS

• BIOS Overview (Administration)

• Accessing BIOS

• Modify Device Configuration (UEFI Boot Mode)