Control the Power State
-
Control the power state using one of these methods:
-
From the local server – Press the Power button on the front panel of the server. This button toggles the power state between standby and powered on.
If power button is held for 5 seconds with host power on, the host powers off immediately.
-
From the Oracle ILOM web interface – Click Host Management → Power Control, access the Select Action list box, and select one of the following:
-
Reset – reboots the host.
-
Immediate Power Off – Immediately turns off the power on the host, leaving the server in standby.
-
Graceful Shutdown and Power Off – Shuts down the OS gracefully then powers off the host, leaving the server in standby.
-
Power On – Powers on the host.
-
Power Cycle – Powers off the host, then powers on the host.
-
-
From the Oracle ILOM CLI:
-
stop /System – After you confirm by typing y, shuts down the OS gracefully then powers off the host, leaving the server in standby.
-
stop -f /System – Immediately turns off the power to the host, leaving the server in standby.
Caution - Immediately powering off the host can cause data loss or corruption on storage devices.
-
start /System – Turns on full power to the host.
-
reset /System – Resets the host, returning the server to a powered on state.
-
-