Go to main content

SPARC M8 and SPARC M7 Servers Service Manual

Exit Print View

» ...Documentation Home » SPARC M8 and SPARC M7 Series Servers ... » SPARC M8 and SPARC M7 Servers Service Manual » Servicing SPs » SER MGT and NET MGT Port Locations and Numbering

Updated: January 2022

SPARC M8 and SPARC M7 Servers Service Manual

Document Information

Using This Documentation

Identifying Components

Detecting and Managing Faults

Preparing for Service

Controlling the Server and Domains

Understanding Server Configurations and Failover Behavior

Servicing CMIOUs

Servicing DIMMs

SP Firmware and Configuration

SP General Status LEDs

SER MGT and NET MGT Port Locations and Numbering

Oracle ILOM Paths for SPMs

Prevent Automatic SP or SPP Failover

Determine Which SP Is Managing System Activity

Determine Which SPP Is Managing DCU Activity (SPARC M7-16)

Change Which SP Is Managing System Activity

Change Which SPP Is Managing DCU Activity (SPARC M7-16)

Prepare to Remove an SP

Prepare to Remove an SPP (SPARC M7-16)

Remove an SP or SPP

Install an SP or SPP

Servicing PCIe Cards

Servicing Power Supplies

Servicing Fan Modules (CMIOU Chassis)

Servicing Fan Modules (Switch Chassis)

Servicing Switch Units

Servicing PDECBs

Servicing eUSB Disks

Servicing a CMIOU Chassis Fan Cable Assembly

Servicing the Front Indicator Panel

Servicing the Front Indicator Panel Cable

Servicing Power Modules

Servicing SP Trays

Servicing Batteries

Servicing the CMIOU Chassis

Servicing the Switch Chassis

Servicing SP Internal Interconnect Assemblies

Servicing Internal Interconnect Assemblies

Servicing External Interconnect Assemblies

Language:

SER MGT and NET MGT Port Locations and Numbering

The NET MGT and SER MGT ports are accessible on the SPs and SPPs from the rear of the server.

Refer to the SPARC M8 and SPARC M7 Servers Installation Guide for information about cabling the network management ports on your server.

Note - The SPARC M8 SP has a SPARC M8 label on its left extraction lever. The SPARC M7 SPs do not have a label.

image:Illustration that provides links to the service instructions for the management ports.

No.	Description	Links
1–4	SER MGT ports (0–3)	The serial ports enable you to connect directly to the SPs and SPPs.
5–8	NET MGT ports (0–3)	The Ethernet ports enable you to connect the server to your local network so that you can manage the server from a remote location.

Related Information

Copyright © 2015, 2022,, Oracle and/or its affiliates.