Component Oracle ILOM State Properties
The following table defines the Oracle ILOM properties seen when using the Oracle ILOM
show command.
|
|
|
requested_config_state
|
Property can be Enabled or
Disabled. When
Enabled, the component is installed and
accessible by the server. When Disabled, the
component is installed, but the server cannot access it.
|
|
current_config_state
|
Property can be Enabled,
Disabled, or
Degraded.
When Enabled, the component is installed and
accessible by the server. When Disabled, the
component is installed, but the server cannot access it. When
Degraded, the component has faulted and
requires service.
|
|
fault_state
|
Property can be OK or
Faulted. The property will display
OK when the component is working properly. When
Faulted, the component has faulted and requires
service.
|
|
clear_fault_action
|
Legacy property previously used to clear component faults. Use the
fmadm acquit from the Oracle ILOM fault management shell to
clear component faults. See Clear a Fault Manually. |
|