Remove the Memory Mezzanine Assembly

1. Prepare the server for FB-DIMM removal. See:
   • Power Off the Server
   • Disconnect Cables From the Server
   • Remove the Server From the Rack
   • Perform Antistatic Measures
   • Remove the Top Cover
   • Remove the Memory Air Duct
2. Disconnect all power cables from the server (Identifying an FB-DIMM).
3. Rotate the memory mezzanine green levers 90 degrees to vertical (Removing the Memory Mezzanine).
4. Lift the memory mezzanine straight up and out of the chassis (Removing the Memory Mezzanine).

   Place on an antistatic mat.

   Figure 4-18  Removing the Memory Mezzanine

   
   
5. Remove the memory mezzanine riser cards.
6. Remove the riser cards by carefully pulling them straight up (Removing Memory Mezzanine Riser Cards).

   Place on an antistatic mat.

   Figure 4-19  Removing Memory Mezzanine Riser Cards

   
   
7. To install the memory mezzanine assembly, go to Install the Memory Mezzanine Assembly