Remove the SCC Module

1. Back up OpenBoot PROM variables with one of the following procedures:

   • For ILOM 3.0 Web Interface: Back up per Chapter 10, “Backing Up and Restoring ILOM Configuration,” from the Oracle Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedure Guide (820-0052) available at: http://docs.oracle.com/cd/E19860-01/index.html. Use a passphrase to backup the OpenBoot PROM variables.

   • For ILOM 3.0 CLI: Back up per Chapter 10, “Backing Up and Restoring ILOM Configuration,” from the Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedure Guide (821-1611) available at: http://docs.oracle.com/cd/E19860-01/index.html. Use a passphrase to backup the OpenBoot PROM variables.

   • For ILOM 2.0: The ILOM Back up/Restore feature is absent. Record output from the OpenBoot PROM printenv command or the Oracle Solaris eeprom command for use after motherboard replacement.

2. Prepare the server for removing the SCC module. See:
   • Power Off the Server
   • Disconnect Cables From the Server
   • Remove the Server From the Rack
   • Perform Antistatic Measures
   • Remove the Top Cover
   • Remove the PCI Mezzanine Assembly

     Remove the Memory Mezzanine Assembly

3. Locate the SCC module.
4. Carefully pull the SCC module straight up from its connector.