Signal Pinouts
This appendix gives the pinouts for the server
rear ports and identifies connectors on various server boards. Topics
include:
A.1 Gigabit Ethernet Ports
The server
has four autonegotiating 10/100/1000BASE-T Gigabit Ethernet system domain
ports. All four Ethernet ports use a standard RJ-45 connector, the
transfer rates for which are given in Ethernet Connection Transfer Rates. Gigabit Ethernet Port Pin Numbering shows the pin numbering of the ports. Gigabit Ethernet Port Signals describes the pin signals.
Table A-1 Ethernet Connection Transfer Rates
|
|
|
Ethernet |
10BASE-T |
10 Mbit/sec |
Fast Ethernet |
100BASE-TX |
100 Mbits/sec |
Gigabit Ethernet |
1000BASE-T |
1000 Mbit/sec |
|
Figure A-1 Gigabit Ethernet Port Pin Numbering
Table A-2 Gigabit Ethernet Port Signals
|
|
|
|
1 |
Transmit/Receive Data 0 + |
5 |
Transmit/Receive Data 2 – |
2 |
Transmit/Receive Data 0 – |
6 |
Transmit/Receive Data 1 – |
3 |
Transmit/Receive Data 1 + |
7 |
Transmit/Receive Data 3 + |
4 |
Transmit/Receive Data 2 + |
8 |
Transmit/Receive Data 3 – |
|