Changing POST Parameters

1. Access the ILOM -> prompt:

   If connected to the console, issue the #. key sequence to switch to the -> prompt:

   #.
   

2. Use the ILOM commands to change the POST parameters.

   The set /SYS keyswitch_state command sets the virtual keyswitch parameter. For example:

   -> set /SYS keyswitch_state=Diag
   Set ???keyswitch_state' to ???Diag'
   

   To change individual POST parameters, you must first set the keyswitch_state parameter to normal. For example:

   -> set /SYS keyswitch_state=Normal
   Set ???ketswitch_state' to ???Normal'
   -> set /HOST/diag property=Min