Remove the FB-DIMM Fan Assembly (Fan Tray 2)

1. Prepare the server for FB-DIMM fan removal. See:
   • Power Off the Server
   • Disconnect Cables From the Server
   • Remove the Server From the Rack
   • Perform Antistatic Measures
   • Remove the Top Cover
2. Loosen the green FB-DIMM fan assembly captive screw..

   Figure 5-9  Removing the FB-DIMM Fan Assembly

   
   
3. Pull the FB-DIMM fan assembly out of the chassis.
4. Set the FB-DIMM fan assembly aside on an antistatic mat.
5. Continue to Install the Hard Drive Fan Assembly (Fan Tray 1).