Displaying FRU Information

Before You Begin

Use the show command to display information about individual FRUs in the server.

• At the -> prompt, enter the show command.

  In the following example, the show command is used to get information about a memory module (FB-DIMM).

  -> show /SYS/MB/CMP0/BR0/CH0/D0
   
  /SYS/MB/CMP0/BR0/CH0/D0
     Targets:
         R0
         R1
         SEEPROM
         SERVICE
         PRSNT
         T_AMB
   
     Properties:
         type = DIMM
         component_state = Enabled
         fru_name = 1024MB DDR2 SDRAM FB-DIMM 333 (PC2 5300)
         fru_description = FBDIMM 1024 Mbyte
         fru_manufacturer = Micron Technology
         fru_version = FFFFFF
         fru_part_number = 18HF12872FD667D6D4
         fru_serial_number = d81813ce
         fault_state = OK
         clear_fault_action = (none)
   
     Commands:
         cd
         show