Remove the Power Board

1. Prepare the server for power board removal. See:
   • Power Off the Server
   • Disconnect Cables From the Server
   • Remove the Server From the Rack
   • Perform Antistatic Measures
   • Remove the Top Cover
2. Perform the removal instructions in the following sections:
   • Remove the Memory Mezzanine Assembly
   • Remove the PCI Mezzanine Assembly
   • Remove the System Fan Assembly (Fan Tray 0)
   • Remove the Optical Media Drive
   • Remove the Motherboard Assembly
3. Remove the screws that secure the power board to the chassis (Removing the Power Board Screws).

   Figure 5-11  Removing the Power Board Screws

   
   
4. Lift the power board out of the chassis, and set it aside on an antistatic mat.
5. Continue to Install the Power Board.