Install the Fan Assembly Door
Note - The procedures in this section should be used for systems configured with twelve 3.5-inch storage drives or twenty-four 2.5-inch storage drives. If your system is configured with eight 2.5-inch drives, see Install the Disk Cage Cover.
- Place the fan assembly door on the chassis and slightly over the fan assembly.
-
Slide the fan assembly door forward and under the lip of the forward top cover
until it latches into place [1].
-
Use a No. 2 Phillips screwdriver to install and secure the fan assembly door
[2].
- If your system is configured with twelve 3.5-inch storage drives, install and tighten the two screws on each side of the chassis and the three screws on top of the chassis.
- If your system is configured with twenty-four 2.5-inch storage drives, install and tighten the two screws on each side of the chassis.