Go to main content
Index
A
- AC power
- full
Powering the Host On and Off
- standby
Powering the Host On and Off
- access route and data center checklist
Access Route and Data Center Room Checklist
- activity indicator
Server System-Level Status Indicators
- add-in cards
- configuration utilities in Legacy BIOS Boot Mode
Configuration Utilities for Add-In Cards
- configuration utilities in UEFI BIOS Boot Mode
Configuration Utilities for Add-In Cards
- Advanced BIOS screen
BIOS Advanced Menu Selections
- agency compliance specifications
Agency Compliance
- airflow requirements
Ventilation Guidelines
- antistatic
- mat
Electrostatic Discharge Safety
- measures
- applying
Take Antistatic Measures
- wrist strap
Electrostatic Discharge Safety
- antistatic measures
- removing
Remove Antistatic Measures
- attaching devices to server
Attaching Devices to the Server
- auto service request checklist
Auto Service Request Checklist
- AutoYaST
- SLES OS
Install SLES OS Using PXE Network Boot
B
- back panel
- connectors
Back Panel Status Indicators, Connectors, Drives, and PCIe Slots
- features
Back Panel Status Indicators, Connectors, Drives, and PCIe Slots
- battery
- description
Customer-Replaceable Units
- installing
Install the Battery
- removing
Remove the Battery
- bezel
- controls
Front Panel Components on Eight Drive Systems
- BIOS
Preparing the Boot Environment- changing boot mode
Set the Boot Mode
Set the Boot Mode
- configuring serial port sharing
Configuring Serial Port Sharing
- Ethernet ports booting priority
Ethernet Port Boot Order
- memory-mapped I/O restriction
Configuring the Input/Output Settings to Support the VMware ESXi Installation
- procedure for editing and viewing
Verify the UEFI Optimal Defaults
- procedure for editing and viewing settings
Verify the UEFI Optimal Defaults
Verify the UEFI Optimal Defaults
- setting defaults
Verify the BIOS Optimal Defaults
- setting the boot mode
- Oracle Solaris OS
Set the Boot Mode
- Windows OS
Set the Boot Mode
- verification of optimal default settings
- Oracle Sloaris OS
Verify the UEFI Optimal Defaults
- verification of optimized defaults settings
- Windows OS
Verify the UEFI Optimal Defaults
- BIOS boot mode, switching between Legacy BIOS and UEFI modes
Switching Between Legacy BIOS and UEFI Boot Modes
- BIOS factory defaults, verifying
Verify BIOS Factory Default Settings
- BIOS Setup Utility
- accessing
Access BIOS Setup Utility Menus
- Advanced screen
BIOS Advanced Menu Selections
- boot mode
Selecting Legacy BIOS or UEFI Boot Mode
- Boot screen
BIOS Boot Menu Selections
- Exit screen
BIOS Exit Menu Selections
- exiting from
Exit BIOS Setup Utility
- function keys
BIOS Key Mappings
- IO screen
BIOS IO Menu Selections
- legacy boot mode
Selecting Legacy BIOS or UEFI Boot Mode
- Main screen
BIOS Main Menu Selections
- menus, accessing
Access BIOS Setup Utility Menus
- navigating menu options
Navigate BIOS Setup Utility Menus
- service processor network settings
Configure SP Network Settings
- setup screens summary
BIOS Setup Utility Menus
- shortcut key sequences
BIOS Key Mappings
- TPM support
Configure TPM Support
- UEFI boot mode
Selecting Legacy BIOS or UEFI Boot Mode
- UEFI-compliant, description
Using UEFI
- board components
System Chassis Components
- boot device menu
- selections
Install Oracle VM Using Local or Remote Media
- Boot Device menu
- selections
Install VMware ESXi Using Local or Remote Media
- boot device, selecting
Select the Boot Device
- boot disc image
- Oracle Linux OS
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
- Oracle Linux OS 7
Install Oracle Linux 7 OS Manually Using Local or Remote
Media
- SLES OS
Install SLES 12 OS Manually Using Local or Remote Media
Install SLES 11 SP3 OS Manually Using Local or Remote Media
- boot disk image
- RHEL OS
Install RHEL 6.5, 6.6, or 7 OS Manually Using Local or Remote Media
- boot drive
- LEDs
Storage and Boot Drive Indicators
- boot media
- preparing
Preparing the Boot Media
Preparing the Boot Media
- requirements
- Oracle Solaris OS
Boot Media
Options Requirements
- Windows OS
Boot Media
Options Requirements
- boot media option
- selecting
- Oracle Solaris OS
Selecting
the Boot Media Option
- Windows OS
Selecting
the Boot Media Option
- boot mode
- changing
Set the Boot Mode
Set the Boot Mode
- preserving settings when switching modes
Switching Between Legacy BIOS and UEFI Boot Modes
- selecting
Select Legacy BIOS or UEFI BIOS Boot Mode
- booting from ISO image
Install VMware ESXi Using Local or Remote Media
Install Oracle VM Using Local or Remote Media
- buttons
- Fault Remind
Remove a Processor
- Power
Power On the Server
Power Down the Server for Immediate Shutdown Using the Power Button
Power Down the Server Gracefully Using the Power Button
C
- cable management arm (CMA)
- installing on server
Install the Cable Management Arm
- uninstalling
Remove the Cable Management Arm
- cable part number
- auxiliary signal cable
Install the Storage Drive Backplane for Twenty-Four Drive Systems
Install the Storage Drive Backplane for Twelve-Drive Systems
Install the Storage Drive Backplane for Eight-Drive Systems
- DVD power and SATA data cable
Install the DVD Drive
- left LED indicator module cable
Install the Left LED Indicator Module
- NVMe cables
Install NVMe Cables
- power cable
Install the Storage Drive Backplane for Twelve-Drive Systems
Install the Storage Drive Backplane for Eight-Drive Systems
- power cable, center
Install the Storage Drive Backplane for Twenty-Four Drive Systems
- power cable, right
Install the Storage Drive Backplane for Twenty-Four Drive Systems
- rear storage drive power cable
Install the Storage Drive Backplane for Rear-Mounted Storage Drives
- right LED/USB indicator module cable
Install the Right LED/USB Indicator Module
- SAS cables
Install SAS Storage Drive Cables
- cables
- connecting
Reconnect Power and Data Cables
- disconnecting
Disconnect Cables From the Server
- cables, connecting
Connecting Cables and Power Cords
- cabling the server
Attach Devices to the Server
- cabling, required cable connections
Cabling the Server and Applying Power
- chassis components
System Chassis Components
- chassis serial number, locating
Locating the Chassis Serial Number
- checklist
- access route
Access Route and Data Center Room Checklist
- auto service request
Auto Service Request Checklist
- data center environment
Data Center Environment Checklist
- facility power
Facility Power Checklist
- logistics
Logistics Checklist
- rackmount
Rackmount Checklist
- safety
Safety Checklist
- clearance, airflow
Ventilation Guidelines
- components and nomenclature
System Chassis Components
- configuration
- Intel NIC teaming
- Windows OS
Configuring
Intel NIC Teaming
- network interfaces
- Linux OS
NIC Connectors
- RAID
- Linux OS
Configuring RAID
- Windows OS
Configuring
RAID
- Configure Management Network screen
Configure Network Adapter Settings
- configuring
- network interface cards
- Oracle VM
Configuring Network Interfaces
- configuring VMware ESXi
Manage VMware ESXi Resources
- connecting devices to server
Attaching Devices to the Server
- connector locations
Attaching Devices to the Server
- connectors
- location
Back Panel Status Indicators, Connectors, Drives, and PCIe Slots
Front Panel Status Indicators, Connectors, and Drives
- console
- device required
Tools and Equipment Needed for Installation
- selecting display option
Selecting
the Console Display Option
- serial
Access Serial Remote Host Console (CLI)
- console display
- options
Console Display Options
- console display options
- selecting
- Windows OS
Selecting
the Console Display Option
- controls, front panel
About Controls and Connectors
- cooling unit components
Cooling Unit Components
- crossover pinouts for SER MGT port
Serial Management Port Signals
- current
Electrical Power Requirements
D
- data center environment checklist
Data Center Environment Checklist
- default boot mode
Select Legacy BIOS or UEFI BIOS Boot Mode
- device drivers
- loading instructions
- Windows OS
Supported SAS PCIe HBAs Requiring Mass Storage Driver
- SAS PCIe HBAs requiring drivers
SAS PCIe HBA Requiring Mass Storage Driver for Windows Server 2012
- diagnosing
- hardware faults
Troubleshooting and Diagnostic Information
- DIMMs
- description
Customer-Replaceable Units
- fault LEDs
- inconsistencies with BIOS
Inconsistencies Between DIMM Fault Indicators and the BIOS Isolation of Faulty
DIMMs
- Fault Remind button
Using the Server Fault Remind Button
- identifying a faulty DIMM
Identify and Remove a Faulty DIMM
- installing
Install a DIMM
- labels
DIMM Rank Classification Labels
- physical layout
DIMM and Processor Physical Layout
- population example for optimal performance
Populating DIMMs for Optimal System Performance
- population rules
DIMM Population Rules
- rank classification labels
DIMM Rank Classification Labels
- removing
Identify and Remove a Faulty DIMM
- supported configurations
DIMM Population Rules
- disk backplane components
Disk Backplane Components
- disk cage cover
- installing
Install the Disk Cage Cover
- removing
Remove the Disk Cage Cover From the Server
- disk components
Hard Disk Drive Components
- disk drive backplanes
- description
Field-Replaceable Units
- disk drives See
drive
- documentation
- for diagnostics
Troubleshooting and Diagnostics References
- for Oracle ILOM
Connecting to Oracle ILOM
- for Oracle Linux
Oracle Linux Operating System Documentation
- for Oracle Solaris
Oracle Solaris Operating System Documentation
- for Oracle VM
Oracle VM Documentation
- for server
Product Documentation Library
- Oracle VM
Manage Oracle VM Resources
- server
Supported VMware ESXi Software
Supported Oracle VM Software
- VMware ESXi
Manage VMware ESXi Resources
- drive
- hot-plugging
Storage Drives Hot-Plug Conditions
- identification
Remove an HDD or SSD Storage Drive
- latch release button
Remove an HDD or SSD Storage Drive
- driver
- enabling
Enable the megaraid_sas Driver
- DVD drive
- description
Field-Replaceable Units
- installing
Install the DVD Drive
- removing
Remove the DVD Drive
E
- eight-drive storage drive backplane
- installing
Install the Storage Drive Backplane for Eight-Drive Systems
- removing
Remove the Storage Drive Backplane for Eight-Drive Systems
- electrical specifications
- server input current
Electrical Power Requirements
- voltage
Electrical Power Requirements
- electrostatic discharge
- prevention
Take Antistatic Measures
- safety precautions
Electrostatic Discharge Safety
- entity presence events
Entity Presence Events
- environmental events
Environmental Events
- environmental specifications
Environmental Requirements
- ESD precautions
ESD and Safety Precautions
- Ethernet cables, connecting
Attach Devices to the Server
- Ethernet ports
Ethernet Ports- booting priority
Ethernet Port Boot Order
Ethernet Port Boot Order
- device and driver naming
Ethernet Port Boot Order and Device Naming
- pinout
10-GbE Port Signals
- Ethernet ports, location of
Rear Panel Cabling Reference
- Exit BIOS screen
BIOS Exit Menu Selections
- exploded view of server
Illustrated Parts Breakdown
- external cables, connecting
Attach Devices to the Server
Rear Cable Connections
and Ports
F
- facility power checklist
Facility Power Checklist
- fan assembly door
- installing
Install the Fan Assembly Door
- removing
Remove the Fan Assembly Door From the Server
- fan events
Fan Events
- fan module
- installing
Install a Fan Module
- removing
Remove a Fan Module
- fan modules
- description
Customer-Replaceable Units
- Fault Remind button
- location
Remove a Processor
Using the Server Fault Remind Button
- using
Using the Server Fault Remind Button
- firmware components
System Chassis Components
- first-time log in
- Oracle ILOM
Log In to Oracle ILOM Using a Local Serial Connection
- front panel
- connectors
Front Panel Status Indicators, Connectors, and Drives
- features
Front Panel Status Indicators, Connectors, and Drives
- full power mode
Powering the Host On and Off
- function keys within BIOS Setup Utility
BIOS Key Mappings
G
- Gigabit Ethernet connectors
Ethernet Ports
- Gigabit Ethernet ports
Gigabit Ethernet Ports- pinout
10-GbE Port Signals
- graceful power off
Power Host On and Off Using Oracle ILOM
Power Off the Host Using the Power Button
H
- hard disk drive components
Hard Disk Drive Components
- hard disk drive events
Hard Disk Drive Events
- hard drives See
drive
- hardware faults
- diagnosing
Troubleshooting and Diagnostic Information
- Hardware Management Pack
Optional Supplemental Software
Oracle System
Assistant Overview
- documentation
Installing Updates Using Other Methods
- overview
Oracle Hardware Management Pack
- HDD drive
- installing
Install an HDD or SSD Storage Drive
- removing
Remove an HDD or SSD Storage Drive
- host bus adapter cache settings
- configuring
- Legacy BIOS boot mode
Return the HBA Cache Settings to Default Values in UEFI Boot Mode
Return the HBA Cache Settings to Default Values in Legacy BIOS Boot Mode
Configure the HBA Cache Settings in Legacy BIOS Boot Mode
- UEFI boot mode
Configure the HBA Cache Settings in UEFI Boot Mode
- host console
- viewing
Accessing the Host Console
Accessing the Host Console
- hot-plugging drives
Storage Drives Hot-Plug Conditions
I
- illustrated parts breakdown
Illustrated Parts Breakdown
- immediate power off
Power Host On and Off Using Oracle ILOM
Power Off the Host Using the Power Button
- indicators (LEDs)
- back panel
Back Panel Status Indicators, Connectors, Drives, and PCIe Slots
- front panel
Front Panel Status Indicators, Connectors, and Drives
- install boot media
Selecting
the Boot Media Option
Selecting the Boot Media Option
Selecting
the Boot Media Option
- installation
- manual
- Windows OS
Manual Windows Server OS Installation
- options
- Windows OS
Windows OS
Installation Options
- Oracle Enterprise Manager Ops Center
- Windows OS
Windows OS
Installation Options
- Oracle System Assistant
- Windows OS
Assisted Windows Server OS Installation
- overview
About VMware ESXi Installations
About Oracle VM Installations
- screens
Gathering the Required Information
- selecting installation type
- Windows OS
Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
- selecting language
- Windows OS
Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
- selecting specific operating system
- Windows OS
Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
- single server
- Windows OS
Single-Server Installation
Methods
Windows OS
Installation Options
- task map
VMware ESXi Installation Task Map
Oracle VM Server Installation Task Map
Oracle Solaris OS
Installation Task Map
- Windows OS
Windows OS
Installation Task Map
- using installation media
Installing VMware ESXi on a Single System Using Media
Installing Oracle VM on a Single System Using Media
- using local or remote media
Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
- using media
- Linux OS
Manual Linux OS Installation
- Windows OS
Installing Windows Server on a Single System Manually
- using Oracle System Assistant
Installing Oracle VM Server on a Single System Using Oracle System Assistant- Linux OS
Assisted Linux OS Installation
- Oracle Solaris
Installing
Oracle Solaris on a Single System Using Oracle System Assistant
- Windows OS
Installing
Windows Server on a Single System Using Oracle System Assistant
- using PXE network boot
- Windows OS
Install Windows Server 2012 or 2012 R2 Using PXE Network Boot
- installation media
Install a Linux OS Using Oracle System Assistant
- installation method
- manual
Manual Oracle VM Server Installation
- using Oracle System Assistant
Assisted Oracle VM Server Installation
- installation methods
- boot media options
Selecting
the Boot Media Option
Selecting the Boot Media Option
Selecting
the Boot Media Option
- manual
Manual Oracle Solaris Installation
- using Oracle System Assistant
Assisted Oracle Solaris
Installation
- installation option
- local
Single-Server Installation Methods
- remote
Single-Server Installation Methods
- single server
Single-Server Installation Methods
Single-Server Installation
Methods
- installation options
VMware ESXi Installation Options
Oracle VM Server Installation Options
- Linux OS
Linux OS Installation Options
- single server
Single-Server Installation Methods
- installation prerequisites
Before You Begin
Before You Begin
- installation target
- drive restriction
- Linux OS
Important: Internal, USB Embedded Oracle System Assistant Flash Drive Should
Not Be Used as a Boot or Storage Drive
- fibre channel storage area network (SAN) device
Set Up a Fibre Channel Storage Area Network Device as the Installation Target
Set Up a Fibre Channel Storage Area Network Device as the Installation Target
Set Up a Fibre Channel Storage
Area Network Device as the Installation Target
- Fibre Channel Storage Area Network (SAN) device
- Linux OS
Set Up a Fibre Channel Storage Area Network Device as the Installation
Target
- local storage drive
Set Up a Local Storage Drive (HDD, SSD, or RAID Volume) as the Installation Target
Set Up a Local Storage Drive (HDD, SSD, or RAID Volume) as the Installation Target
Set Up a Local Storage Drive
(HDD or SSD) as the Installation Target
- Linux OS
Set Up a Local Storage Drive (HDD or SSD) as the Installation Target
- options
Installation Target Options
Installation
Target Options
Installation Target Options
Installation
Target Options
- Linux OS
Installation Target Options
- preparing
Preparing the Installation Target
Preparing the Installation Target
- selecting
- Linux OS
Selecting the Installation Target Option
- setting up Fibre Channel storage area network (SAN) device
- Windows OS
Set Up a Fibre Channel Storage
Area Network Device as the Installation Target
- setting up local storage drive
- Windows OS
Set Up a Local Storage Drive
(HDD or SSD) as the Installation Target
- installation target option
- selecting
- Windows OS
Selecting
the Installation Target Option
- installation task map
- Oracle Linux OS
Oracle Linux 6.5, 6.6, or 7 OS Installation Task Map
- RHEL OS
RHEL 6.5, 6.6, or 7 OS Installation Task Map
- SLES OS
SLES 11 SP3 OS Installation Task Map
- installation task overview
Installation Procedure Overview
- installation using KickStart
- RHEL OS
Install RHEL 6.5, 6.6, or 7 OS Using PXE Network Boot
- installation using local or remote media
- Oracle Linux OS
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
- Oracle Linux OS 7
Install Oracle Linux 7 OS Manually Using Local or Remote
Media
- SLES OS
Install SLES 12 OS Manually Using Local or Remote Media
Install SLES 11 SP3 OS Manually Using Local or Remote Media
- installation using Oracle System Assistant
- Linux OS
Installing a Linux OS on a Single System Using Oracle System Assistant
- installing
- battery
Install the Battery
- DIMMs
Install a DIMM
- disk cage cover
Install the Disk Cage Cover
- DVD drive
Install the DVD Drive
- eight-drive storage drive backplane
Install the Storage Drive Backplane for Eight-Drive Systems
- fan assembly door
Install the Fan Assembly Door
- fan module
Install a Fan Module
- HDD drive
Install an HDD or SSD Storage Drive
- LED indicator module (left)
Install the Left LED Indicator Module
- LED/USB indicator module (right)
Install the Right LED/USB Indicator Module
- motherboard assembly
Install the Motherboard Assembly
- Oracle Storage 12 Gb/s SAS PCIe RAID HBA card
Install the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card
- PCIe cards
Install a PCIe Card
- power supply
Install a Power Supply
- processors
Install a Processor
- rear storage drive
Install a Rear Storage Drive
- rear-mounted storage drive backplane
Install the Storage Drive Backplane for Rear-Mounted Storage Drives
- server into rack
Reinstall the Server in the Rack
- server top cover
Install the Server Top Cover
- SSD drive
Install an HDD or SSD Storage Drive
- twelve-drive storage drive backplane
Install the Storage Drive Backplane for Twelve-Drive Systems
- twenty-four drive storage drive backplane
Install the Storage Drive Backplane for Twenty-Four Drive Systems
- USB flash drive
Install an Internal USB Flash Drive
- installing operating system
- overview
About Microsoft Windows Server Operating System Installs
About Linux Operating System Installs
About Oracle Solaris Operating System Installs
- supported operating systems
Supported Windows Server Operating Systems
Supported Linux Operating Systems
Supported Oracle Solaris Operating Systems
- installing Oracle Solaris OS
- on a single system using media
Installing the Oracle Solaris 11.2 (With SRU5 or Later) on a Single System Manually
- using local or remote media
Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media
- using remote media from a PXE-based network
Install Oracle Solaris 11.2 (With SRU5 or Later) Using PXE Network Boot
- installing server
- ESD precautions
ESD and Safety Precautions
- optional components
Optional Component Installation
- tools required
Tools and Equipment Needed for Installation
- installing server into a rack
Installing the Server Into a Rack
- InstallPack
- installing supplemental software
- Windows OS
Installing
Device Drivers and Supplemental Software
- Intel NIC teaming configuration
- post installation
Configuring
Intel NIC Teaming
- inventory
- ship kit
Shipping Inventory
- IO allocation
- enabling and disabling resources
Configure I/O Resource Allocation
- IO BIOS screen
BIOS IO Menu Selections
- IP address, setting
Configure SP Network Settings
- IPMI
Oracle ILOM Service Processor and User Interfaces
- IPMI type
Monitoring System Components
- ISO image
- VMware ESXi
Install VMware ESXi Using Local or Remote Media
Install Oracle VM Using Local or Remote Media
- ISO images
- Oracle Linux OS
Install Oracle Linux 7 OS Manually Using Local or Remote
Media
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
- Oracle Solaris OS
Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media
- RHEL OS
Install RHEL 6.5, 6.6, or 7 OS Manually Using Local or Remote Media
- SLES OS
Install SLES 12 OS Manually Using Local or Remote Media
Install SLES 11 SP3 OS Manually Using Local or Remote Media
- Windows OS
Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
K
- KickStart
- Oracle Linux OS
Install Oracle Linux 6.5, 6.6, or 7 OS Using PXE Network
Boot
- RHEL OS
Install RHEL 6.5, 6.6, or 7 OS Using PXE Network Boot
L
- latch release button, drive
Remove an HDD or SSD Storage Drive
- LED indicator module (left)
- installing
Install the Left LED Indicator Module
- removing
Remove the Left LED Indicator Module
- LED/USB indicator module (right)
- installing
Install the Right LED/USB Indicator Module
- removing
Remove the Right LED/USB Indicator Module
- LED/USB indicator modules
- description
Field-Replaceable Units
- replacing
Servicing the Front LED/USB Indicator Modules (FRU)
- LEDs
Back Panel Status Indicators, Connectors, Drives, and PCIe Slots
Front Panel Status Indicators, Connectors, and Drives
- boot drive
Storage and Boot Drive Indicators
- power supply
Remove a Power Supply
Servicing Power Supplies (CRU)
Power Supply Status Indicators
- storage drive
Storage and Boot Drive Indicators
- system status
Server System-Level Status Indicators
- Legacy BIOS
- boot mode, description
Legacy BIOS and UEFI
- overview
Legacy BIOS and UEFI
- Legacy BIOS Boot Mode
- selecting
Selecting Legacy BIOS or UEFI Boot Mode
- switching between UEFI Boot Mode
Switching Between Legacy BIOS and UEFI Boot Modes
- local boot media
- requirements
Local Boot Media Requirements
Local Boot Media Requirements
- Windows OS
Local Boot Media Requirements
- setting up
Set Up the Boot Media for a Local Installation
Set Up the Boot Media for a Local Installation
Set Up the Boot Media for a Local Installation
Set Up the Boot Media for a Local Installation
Set Up the Boot Media for a Local Installation
- local console
- setting up
Access the Host Console Through a Local Graphics Monitor
Set Up the Local Console
Access the Host Console Through a Local Graphics Monitor
Set Up the Local Console
- Windows OS
Set Up the Local Console
- locating chassis serial number
Locating the Chassis Serial Number
- Locator LED button
Server System-Level Status Indicators
- logging in locally
- Oracle ILOM
Log In to Oracle ILOM Using a Local Serial Connection
- logging in remotely
- Oracle ILOM
Log In to Oracle ILOM Using a Remote Ethernet Connection
- logistics checklist
Logistics Checklist
- LSI MegaRAID Storage Manager
- Windows OS
Optional Supplemental Software
M
- Main BIOS screen
BIOS Main Menu Selections
- maintenance mode
Enable the megaraid_sas Driver
- management port
- setting
Configure Network Adapter Settings
- megaraid_sas driver
Enable the megaraid_sas Driver
- memory device components
Memory Device Components
- memory events
Memory Events
- memory-mapped I/O setting
- configuring
Disable the PCI 64 Bit Resources Allocation Property
- menus, BIOS Setup Utility
Access BIOS Setup Utility Menus
- motherboard assembly
- description
Field-Replaceable Units
- installing
Install the Motherboard Assembly
- LED/USB cables
Remove the Motherboard Assembly
- removing
Remove the Motherboard Assembly
- replacing
Servicing the Motherboard Assembly (FRU)
- mounting brackets, installing
Install Mounting Brackets Onto the Server
- My Oracle Support
- using to download software release packages
Options for Accessing Firmware and Software Updates
- web site
Oracle Support
N
- NET MGT port
- pinout
Network Management Port Signals
Network Management Port
Network Management Port Status Indicators
- network interface
- labeling
NIC Connectors
- network interface cards
- configuring
- Oracle VM
Configuring Network Interfaces
- labeling and type
- Oracle VM
NIC Connectors
- network interface configuration
Configuring Network Interfaces
- network interfaces
- configuring
Configuring Network Interfaces
- network management (NET MGT) port, location of
Rear Panel Cabling Reference
- network settings, for service processor
Modifying the Service Processor Network Settings Using Oracle ILOM
- network settings, service processor
Configure SP Network Settings
- Network Time Protocol (NTP)
Install the Battery
- NVMe cables
- description
Field-Replaceable Units
- replacing
Servicing NVMe Cables (FRU)
O
- operating system
- installation options
Oracle Solaris
OS Installation Options
- supported by UEFI BIOS
Selecting Legacy BIOS or UEFI Boot Mode
- versions supported
Supported Oracle Solaris Operating Systems
- operating system updating
- Oracle Linux OS
Post Installation Tasks for Oracle Linux 6.5, 6.6, or 7 OS
- SLES OS
Post Installation Tasks for SLES OS
- operating systems
- configuring preinstalled software
Oracle Solaris Operating System Documentation
- Oracle Linux
- configuring preinstalled software
Configuring the Preinstalled Oracle Linux Operating System
- user documentation
Oracle Linux Operating System Documentation
- Oracle Solaris OS
- configuring preinstalled software
Configuring the Preinstalled Oracle Solaris Operating System
- user documentation
Oracle Solaris Operating System Documentation
- Oracle VM
- configuring preinstalled software
Configuring the Preinstalled Oracle VM Server Software
- user documentation
Oracle VM Documentation
- Option ROMs
- enabling and disabling
Configure Option ROM Settings
- legacy BIOS allocation
Legacy Option ROM Allocation
- minimizing resource exhaustion
Legacy Option ROM Allocation
- Oracle ILOM
- default user name and password
Log In to Oracle ILOM Using a Local Serial Connection
- launching Oracle System Assistant
Launch Oracle System Assistant Using the Oracle ILOM Web Interface
- logging in locally
Log In to Oracle ILOM Using a Local Serial Connection
- logging in remotely
Log In to Oracle ILOM Using a Remote Ethernet Connection
- logging out
Log Out From Oracle ILOM
- modifying service processor network settings
Modifying the Service Processor Network Settings Using Oracle ILOM
- mouse mode
Set the Mouse Mode
- test IPv4 or IPv6 network configuration
Test the IPv4 or IPv6 Network Configuration
- troubleshooting
Troubleshooting Oracle ILOM
- Oracle ILOM interfaces
- SNMP v3
Oracle ILOM Service Processor and User Interfaces
- SSH command-line
Oracle ILOM Service Processor and User Interfaces
- web browser
Oracle ILOM Service Processor and User Interfaces
- Oracle Integrated Lights Out Manager (Oracle ILOM)
- key identity properties (KIP) for FRUID auto-update feature
FRU Key Identity Properties (KIP) Automated Update
- Oracle Linux
- configuring preinstalled software
Configuring the Preinstalled Oracle Linux Operating System
- registering
Register and Update Your Oracle Linux Operating System
- Oracle Linux 6.5 and 6.6 OS
- local or remote media installation
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
- reset power on server
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
- Oracle Linux OS
Install Oracle Linux 6.5, 6.6, or 7 OS Using PXE Network
Boot
- Oracle Linux OS 6.5 and 6.6
- ISO images
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
- reset power on server
Install Oracle Linux 7 OS Manually Using Local or Remote
Media
- Oracle Linux OS 6.6 and 6.6
- reset power on server
Install Oracle Linux 6.5, 6.6, or 7 OS Using PXE Network
Boot
- Oracle Linux OS 7
- ISO images
Install Oracle Linux 7 OS Manually Using Local or Remote
Media
- local or remote media installation
Install Oracle Linux 7 OS Manually Using Local or Remote
Media
- Oracle Linux OS installation
- task map
Oracle Linux 6.5, 6.6, or 7 OS Installation Task Map
- Oracle Solaris documentation web sites
Before You
Begin
- Oracle Solaris OS
- configuring preinstalled software
Configuring the Preinstalled Oracle Solaris Operating System
- ISO images
Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media
- post installation tasks
Post Installation
Tasks for Oracle Solaris
- temporary boot device
Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media
- Oracle Solaris OS install
- using local of remote media
Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media
- Oracle Storage 12 Gb/s SAS PCIe RAID HBA card
- installing
Install the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card
- removing
Remove the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card
- replacing
Servicing the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card (FRU)
- Oracle Storage 12 Gb/s SAS PCIe RAID HBA Internal
- restriction
Return the HBA Cache Settings to Default Values in UEFI Boot Mode
Return the HBA Cache Settings to Default Values in Legacy BIOS Boot Mode
Configuring the HBA Cache Settings to Support ESXi Installation
- Oracle System Assistant
- application OS installation task
- Oracle Solaris OS
Get Updates and Install
OS Tasks
- embedded storage device
Oracle System
Assistant Overview
- install OS task
- Windows OS
Get Updates and Install
OS Tasks
- launching locally
Launch Oracle System Assistant Locally
- launching using Oracle ILOM
Launch Oracle System Assistant Using the Oracle ILOM Web Interface
- obtaining
Obtaining Oracle System
Assistant
Obtaining Oracle System Assistant
Obtaining Oracle System Assistant
Obtaining Oracle System
Assistant
- Windows OS
Obtaining Oracle System
Assistant
- OS install task
Get Updates and Install OS Tasks
- overview
Oracle System Assistant Overview
Oracle System
Assistant Overview
- Windows OS
Oracle System
Assistant Overview
- USB flash drive caution
Install VMware ESXi Using Local or Remote Media
Important: Internal, Embedded Oracle System Assistant USB Flash Drive Should Not Be Used as a Boot or Storage Drive
Install Oracle VM Using Local or Remote Media
Important: Internal, Embedded Oracle System Assistant USB Flash Drive Should Not Be Used as a Boot or Storage Drive
- Oracle VM
- configuring network interface
Configuring Network Interfaces
- configuring preinstalled software
Configuring the Preinstalled Oracle VM Server Software
- documentation
Manage Oracle VM Resources
- post installation tasks
Post Installation Tasks for Oracle VM Server
- updating software
Update Oracle VM Software
- Oracle VM Server
- installation options
Oracle VM Server Installation Options
- software versions supported
Supported Oracle VM Software
- overview of operating system installation
About Microsoft Windows Server Operating System Installs
About Linux Operating System Installs
About Oracle Solaris Operating System Installs
P
- patches and updates
Update the VMware ESXi Software
- PCIe cards
- description
Customer-Replaceable Units
- installing
Install a PCIe Card
- removing
Remove a PCIe Card
- replacing
Servicing PCIe Cards (CRU)
- slot characteristics
PCIe Slot Locations
- PCIe slot numbering
PCIe Slot Locations
- physical security events
Physical Security Events
- physical specifications
Server Physical Specifications
- pinout
- Ethernet ports
10-GbE Port Signals
- Gigabit Ethernet ports
10-GbE Port Signals
- network management port
Network Management Port Signals
- RJ-45 to DB-25 crossover pinout
RJ-45 to DB-9 Adapter Crossovers Wiring Reference
- serial management port
Serial Management Port Signals
- USB port
USB Port Signals
- video connector
Video Connector
- ports
Rear Cable Connections
and Ports- Ethernet
Gigabit Ethernet Ports
- Gigabit Ethernet
Gigabit Ethernet Ports
- network management (NET MGT)
Network Management Port
Network Management Port Status Indicators
- serial management (SER MGT)
Serial Management Port
- USB
USB Ports
- video
Video Connector
- post installation
- configuring Intel NIC teaming
- Windows OS
Configuring
Intel NIC Teaming
- installing device drivers
- Windows OS
Installing
Device Drivers and Supplemental Software
- installing supplemental software
- Windows OS
Installing
Device Drivers and Supplemental Software
Supplemental
Software Component Options
- operating system updating
- Oracle Linux OS
Post Installation Tasks for Oracle Linux 6.5, 6.6, or 7 OS
- tasks overview
- Windows OS
Post Installation Tasks for Windows Server
- post installation tasks
- download and install updates
- RHEL OS
Download and Install OS Updates
- installing Oracle Unbreakable Enterprise kernel
- RHEL OS
(Optional) Install Oracle Unbreakable Enterprise Kernel for Linux on RHEL
Using Local or Remote Console
- installing Oracle Unbreakable Linux
- Oracle Linux OS
Post Installation Tasks for Oracle Linux 6.5, 6.6, or 7 OS
- operating system updating
- RHEL OS
Post Installation Tasks for RHEL 6.5, 6.6, or 7 OS
- SLES OS
Update the SLES Operating System
- Oracle Linux OS
Post Installation Tasks for Oracle Linux 6.5, 6.6, or 7 OS
- Oracle Solaris OS
Post Installation
Tasks for Oracle Solaris
- Oracle VM
Post Installation Tasks for Oracle VM Server
- product registration
- Oracle Linux OS
Post Installation Tasks for Oracle Linux 6.5, 6.6, or 7 OS
- RHEL OS
Register RHEL and Activate Automatic Updates
- SLES OS
Update the SLES Operating System
- RHEL OS
Post Installation Tasks for RHEL 6.5, 6.6, or 7 OS
- VMware ESXi
Post-Installation Tasks for VMware ESXi
- post-installation requirement
- host bus adapter cache settings
Return the HBA Cache Settings to Default Values in UEFI Boot Mode
Return the HBA Cache Settings to Default Values in Legacy BIOS Boot Mode
- power
- button
Power On the Server
Power Down the Server for Immediate Shutdown Using the Power Button
Power Down the Server Gracefully Using the Power Button
- server on
Power On the Server
- standby power mode
Disconnect Cables From the Server
- Power button
Power Off the Host Using the Power Button
- power cords, connecting
Connecting Cables and Power Cords
- power down server
- emergency
Power Down the Server for Immediate Shutdown Using the Power Button
- gracefully
Power Down the Server Gracefully Using the Oracle ILOM CLI
- with Power button
Power Down the Server Gracefully Using the Power Button
- power events
Power Events
- power on server
Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media
- power states
- full
Powering the Host On and Off
- standby
Powering the Host On and Off
- power supplies
- description
Customer-Replaceable Units
- power supply
- installing
Install a Power Supply
- LEDs
Remove a Power Supply
Servicing Power Supplies (CRU)
Power Supply Status Indicators
- removing
Remove a Power Supply
- power unit components
Power Unit Components
- power-on self-test (POST) code checkpoint tests
Server System-Level Status Indicators
- Power/OK indicator
Server System-Level Status Indicators
- powering down
- graceful shutdown
Powering the Host On and Off
- immediately
Power Off the Host Using the Power Button
- using Oracle ILOM
Power Host On and Off Using Oracle ILOM
- using Power button
Power Off the Host Using the Power Button
- precautions
- for rackmounting
Safety Precautions
- for server installation
Preparing for Server Installation
- preinstallation requirement
- host bus adapter cache settings
Configuring the HBA Cache Settings to Support ESXi Installation
- preinstalled operating systems
- Oracle Linux, configuring
Oracle VM
Server Configuration Worksheet
Oracle Linux Configuration Worksheet
- Oracle Solaris, configuring
Oracle Solaris Configuration Worksheet
- Oracle VM, configuring
Configuring the Preinstalled Oracle VM Server Software
- processor components
Processor Components
- processor removal and replacement tool
Selecting the Correct Processor Removal and Replacement Tool
- processor socket cover
- installing
Remove the Motherboard Assembly
- removing
Remove the Motherboard Assembly
- processor(s)
- physical layout
DIMM and Processor Physical Layout
- processors
- description
Field-Replaceable Units
- identifying faulty processor
Remove a Processor
- installing
Install a Processor
- maximum DIMMs supported
DIMM Population Rules
- removal and replacement tool
Selecting the Correct Processor Removal and Replacement Tool
- removing
Remove a Processor
- replacing
Servicing Processors (FRU)
- product notes
- web site
Supported Oracle Solaris Operating Systems
- PSU See
power supply
- PXE installation
Single-Server Installation Methods- Oracle Solaris OS
Install Oracle Solaris 11.2 (With SRU5 or Later) Using PXE Network Boot
- Windows OS
Install Windows Server 2012 or 2012 R2 Using PXE Network Boot
- PXE network boot
- Oracle Linux OS
Install Oracle Linux 6.5, 6.6, or 7 OS Using PXE Network
Boot
- RHEL OS
Install RHEL 6.5, 6.6, or 7 OS Using PXE Network Boot
- SLES OS
Install SLES OS Using PXE Network Boot
- PXE network installation
- RHEL OS
Install RHEL 6.5, 6.6, or 7 OS Using PXE Network Boot
R
- rack compatibility
Rack Requirements
- rack installation
Installing the Server Into a Rack
- rack safety precautions
Safety Precautions
- rackmount
- kit
Installing the Server Into a Rack
- rail assembly
Installing the Server Into a Rack
- stabilizing the rack
Remove the Cable Management Arm
Install the Cable Management Arm
Stabilize the Rack for Installation
- rackmount checklist
Rackmount Checklist
- RAID
- configuring
Configuring RAID
Configuring
RAID
- Windows OS
Configuring
RAID
- RAID volume
- as installation target
Set Up a Local Storage Drive (HDD, SSD, or RAID Volume) as the Installation Target
Set Up a Local Storage Drive (HDD, SSD, or RAID Volume) as the Installation Target
- RAID volume, creating with Oracle System Assistant
Configure RAID on Storage Drives
- rail assembly
Installing the Server Into a Rack
- rear storage drive
- installing
Install a Rear Storage Drive
- removing
Remove a Rear Storage Drive
- rear-mounted storage drive backplane
- installing
Install the Storage Drive Backplane for Rear-Mounted Storage Drives
- removing
Remove the Storage Drive Backplane for Rear-Mounted Storage Drives
- Red Hat Enterprise Linux (RHEL) OS
- installation task map
RHEL 6.5, 6.6, or 7 OS Installation Task Map
- ISO image
Install RHEL 6.5, 6.6, or 7 OS Manually Using Local or Remote Media
- ISO images
Install RHEL 6.5, 6.6, or 7 OS Manually Using Local or Remote Media
- powering on server
Install RHEL 6.5, 6.6, or 7 OS Using PXE Network Boot
Install RHEL 6.5, 6.6, or 7 OS Manually Using Local or Remote Media
- remote boot media
- requirements
Remote Boot Media Requirements
Remote Boot Media Requirements
- windows OS
Remote Boot Media Requirements
- setting up
Set Up the Boot Media for a Remote Installation
Set Up the Boot Media for a Remote Installation
Set Up the Boot Media for a Remote Installation
Set Up the Boot Media for a Remote Installation
- Windows OS
Set Up the Boot Media for a Remote Installation
- remote console
- setting up
Access the Host Console Through the Oracle ILOM Remote System Console Plus
Access the Host Console Through the Oracle ILOM Remote System Console Plus
Set Up the Remote Console
- Linux OS
Set Up the Remote Console
- Windows OS
Set Up the Remote Console
- removing
- antistatic measures
Remove Antistatic Measures
- battery
Remove the Battery
- DIMMs
Identify and Remove a Faulty DIMM
- disk cage cover
Remove the Disk Cage Cover From the Server
- DVD drive
Remove the DVD Drive
- eight-drive storage drive backplane
Remove the Storage Drive Backplane for Eight-Drive Systems
- fan assembly door
Remove the Fan Assembly Door From the Server
- fan module
Remove a Fan Module
- HDD drive
Remove an HDD or SSD Storage Drive
- LED indicator module (left)
Remove the Left LED Indicator Module
- LED/USB indicator module (right)
Remove the Right LED/USB Indicator Module
- motherboard assembly
Remove the Motherboard Assembly
- Oracle Storage 12 Gb/s SAS PCIe RAID HBA card
Remove the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card
- PCIe cards
Remove a PCIe Card
- power supply
Remove a Power Supply
- processors
Remove a Processor
- rear storage drive
Remove a Rear Storage Drive
- rear-mounted storage drive backplane
Remove the Storage Drive Backplane for Rear-Mounted Storage Drives
- server top cover
Remove the Server Top Cover
- SSD drive
Remove an HDD or SSD Storage Drive
- twelve-drive storage drive backplane
Remove the Storage Drive Backplane for Twelve-Drive Systems
- twenty-four drive storage drive backplane
Remove the Storage Drive Backplane for Twenty-Four Drive Systems
- USB flash drive
Remove an Internal USB Flash Drive
- replacing
- battery
Servicing the Battery (CRU)
- DIMMs
Servicing the DIMMs (CRU)
- fan module
Servicing Fan Modules (CRU)
- LED/USB indicator modules
Servicing the Front LED/USB Indicator Modules (FRU)
- motherboard assembly
Servicing the Motherboard Assembly (FRU)
- NVMe cables
Servicing NVMe Cables (FRU)
- power supply
Servicing Power Supplies (CRU)
- processors
Servicing Processors (FRU)
- SAS cables
Servicing SAS Cables (FRU)
- server top cover
Install the Server Top Cover
- storage drive backplanes
Servicing the Front and Rear Storage Drive Backplanes (FRU)
- resetting server power
Install VMware ESXi Using Local or Remote Media
Install Oracle VM Using Local or Remote Media
- resetting the server
Reseting the Server
- root account password, recover
Recover the Root Account Password
S
- safety
- ESD precautions
Electrostatic Discharge Safety
- precautions
Safety Precautions
- symbols
Safety Symbols
- safety checklist
Safety Checklist
- SAS cables
- description
Field-Replaceable Units
- replacing
Servicing SAS Cables (FRU)
- screens, BIOS Setup Utility
Access BIOS Setup Utility Menus
BIOS Setup Utility Menus
- secure shell (SSH) command-line interface
Oracle ILOM Service Processor and User Interfaces
- serial connection
- logging in to Oracle ILOM
Log In to Oracle ILOM Using a Local Serial Connection
- serial management (SER MGT) port
- pinout
Serial Management Port Signals
- RJ-45 to DB-9 crossover pinout
RJ-45 to DB-9 Adapter Crossovers Wiring Reference
- serial management (SER MGT) port, location of
Rear Panel Cabling Reference
- serial null modem cable, connecting
Prepare to Install the Server
- serial number, locating
Locating the Chassis Serial Number
- serial port sharing, configuring
Configuring Serial Port Sharing
- server
- diagnosing
Troubleshooting and Diagnostic Information
- installing into rack
Reinstall the Server in the Rack
- power on
- Oracle Solaris OS
Set the Boot Mode
- resetting
- Oracle Solaris OS
Set the Boot Mode
- resetting power
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
Make a RAID Volume Bootable Using the LSI MegaRAID Configuration Utility
Configure RAID in UEFI Boot Mode
- returning server to operation
Returning the Server to Operation
- troubleshooting
Troubleshooting Server Component Hardware Faults
- weight
ESD and Safety Precautions
- server port MAC addresses
- determining
Determine the MAC Address of a Connected Server Network Port
- server top cover
- installing
Install the Server Top Cover
- removing
Remove the Server Top Cover
- server troubleshooting, information needed when contacting support
Contacting Support
- server, power on
Access BIOS Setup Utility Menus
- server, resetting power
Install Windows Server 2012 or 2012 R2 Using PXE Network Boot
- service
- preparing server
Preparing the Server for Component Replacement
- service processor
- network settings, configuring
Configure SP Network Settings
- Service Required LED
Server System-Level Status Indicators
- set command
Install a Processor
- shipping cartons
- checking for damage
Shipping Inventory
- contents
Shipping Inventory
- shortcut key sequences in BIOS Setup Utility
BIOS Key Mappings
- show command
Install a Processor
- shutting down the system
- gracefully, using Oracle ILOM CLI
Power Down the Server Gracefully Using the Oracle ILOM CLI
- gracefully, using Oracle ILOM web interface
Power Down the Server Gracefully Using the Oracle ILOM Web Interface
- gracefully, using the Power button
Power Down the Server Gracefully Using the Power Button
- immediately, using Oracle ILOM CLI
Power Down the Server for Immediate Shutdown Using the Oracle CLI
- immediately, using Oracle ILOM web interface
Power Down the Server for Immediate Shutdown Using the Oracle ILOM Web
Interface
- immediately, using the Power button
Power Down the Server for Immediate Shutdown Using the Power Button
- Simple Network Management Protocol (SNMP) Traps
- generated by system
Identifying SNMP Trap Messages
- SLES OS
- boot disc image
Install SLES 11 SP3 OS Manually Using Local or Remote Media
- installation task map
SLES 11 SP3 OS Installation Task Map
- ISO images
Install SLES 11 SP3 OS Manually Using Local or Remote Media
- SLES 11 local or remote media installation
Install SLES 11 SP3 OS Manually Using Local or Remote Media
- YaST Online Update
Update the SLES Operating System
- SNMP v3 interface
Oracle ILOM Service Processor and User Interfaces
- software
- installation options
Windows OS
Installation Options
Oracle Solaris
OS Installation Options
- versions supported
Supported Oracle Solaris Operating Systems
- software release packages
Software Release Packages
- SP reset
- using Oracle ILOM
Reset the Service Processor Using Oracle ILOM
- using the pinhole button
Reset the Service Processor From the Server Back Panel
- specifications
- agency compliance
Agency Compliance
- electrical
Electrical Power Requirements
- environmental
Environmental Requirements
- physical
Server Physical Specifications
- SSD drive
- installing
Install an HDD or SSD Storage Drive
- removing
Remove an HDD or SSD Storage Drive
- standby power
Disconnect Cables From the Server
Power Down the Server for Immediate Shutdown Using the Oracle ILOM Web
Interface
Power Down the Server for Immediate Shutdown Using the Oracle CLI
Power Down the Server for Immediate Shutdown Using the Power Button
- start command
Power On the Server
- stop command
Power Down the Server Gracefully Using the Oracle ILOM CLI
- storage drive
- LEDs
Storage and Boot Drive Indicators
- storage drive backplanes
- replacing
Servicing the Front and Rear Storage Drive Backplanes (FRU)
- storage drives
- description
Customer-Replaceable Units
- supplemental software
- Hardware Management Pack
- Windows OS
Optional Supplemental Software
- installing
- Windows OS
Installing
Device Drivers and Supplemental Software
- LSI MegaRAID Storage Manager
- Windows OS
Optional Supplemental Software
- supplemental software options
- Windows OS
Supplemental
Software Component Options
- support for product
Contacting Support
- support worksheet
Technical
Support Information Worksheet
- supported operating systems
Supported Windows Server Operating Systems
Supported Linux Operating Systems
Supported Oracle Solaris Operating Systems
- Linux OS
Supported Linux Operating Systems
- Windows OS
Supported Windows Server Operating Systems
- supported software versions
Supported VMware ESXi Software
Supported Oracle VM Software
- SUSE Linux Enterprise Server (SLES OS)
- AutoYaST
Install SLES OS Using PXE Network Boot
- boot disc image
Install SLES 12 OS Manually Using Local or Remote Media
- ISO images
Install SLES 12 OS Manually Using Local or Remote Media
- powering on server
Install SLES 12 OS Manually Using Local or Remote Media
- prepare for automated install
Install SLES OS Using PXE Network Boot
- reset power on server
Install SLES OS Using PXE Network Boot
- SLES 12 local or remote media installation
Install SLES 12 OS Manually Using Local or Remote Media
- system board components
System Board Components
- system chassis components
System Chassis Components
- system components and nomenclature
Monitoring System Components
- System Customization screen
Configure Network Adapter Settings
- system firmware components
System Firmware Components
- system status indicators
Back Panel Status Indicators, Connectors, Drives, and PCIe Slots
Front Panel Status Indicators, Connectors, and Drives
T
- task map
VMware ESXi Installation Task Map
Oracle VM Server Installation Task Map
Oracle Solaris OS
Installation Task Map
- installation
- Windows OS
Windows OS
Installation Task Map
- tasks performed
- tools and equipment needed for server installation
Tools and Equipment Needed for Installation
- technical support
Contacting Support
- temporary boot device
- Oracle Linux OS
Install SLES OS Using PXE Network Boot
Install Oracle Linux 6.5, 6.6, or 7 OS Using PXE Network
Boot
Install Oracle Linux 7 OS Manually Using Local or Remote
Media
Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote
Media
- Oracle Solaris OS
Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media
- RHEL OS
Install RHEL 6.5, 6.6, or 7 OS Using PXE Network Boot
Install RHEL 6.5, 6.6, or 7 OS Manually Using Local or Remote Media
- SLES OS
Install SLES 12 OS Manually Using Local or Remote Media
Install SLES 11 SP3 OS Manually Using Local or Remote Media
- specifying
Install VMware ESXi Using Local or Remote Media
Install Oracle VM Using Local or Remote Media
- tool-less slide-rail assemblies, installing
Attach Tool-less Slide-Rail Assemblies
- tools required for service
Required Tools
- troubleshooting
- information needed when contacting support
Contacting Support
- overview
Troubleshooting With Diagnostic Tools
- server
Troubleshooting Server Component Hardware Faults
- Trusted Platform Module (TPM), configuring support for
Configure TPM Support
- twelve-drive storage drive backplane
- installing
Install the Storage Drive Backplane for Twelve-Drive Systems
- removing
Remove the Storage Drive Backplane for Twelve-Drive Systems
- twenty-four drive storage drive backplane
- installing
Install the Storage Drive Backplane for Twenty-Four Drive Systems
- removing
Remove the Storage Drive Backplane for Twenty-Four Drive Systems
U
- UEFI
- procedure for editing and viewing settings
Verify the UEFI Optimal Defaults
- setting the boot mode
- Solaris OS
Set the Boot Mode
- setting the Boot Mode
Set the Boot Mode - Linux OS
Preparing the Boot Environment
- setting up
- Windows OS
Preparing the Boot Environment
- verifying optimal default settings
Verify the UEFI Optimal Defaults
- UEFI boot mode
- advantages of using
UEFI Boot Mode Advantages
- selecting
Selecting Legacy BIOS or UEFI Boot Mode
- supported operating systems
Selecting Legacy BIOS or UEFI Boot Mode
- UEFI-compliant BIOS, description
Using UEFI
- Unified Extensible Firmware Interface (UEFI)
- boot mode, description
Legacy BIOS and UEFI
- overview
Legacy BIOS and UEFI
- updating software
- Oracle VM
Update Oracle VM Software
- updating VMware ESXi
Update the VMware ESXi Software
- USB flash drive
- installing
Install an Internal USB Flash Drive
- removing
Remove an Internal USB Flash Drive
- USB port
- pinout
USB Port Signals
- USB ports, location of
Rear Panel Cabling Reference
V
- ventilation requirements
Ventilation Guidelines
- video port
- pinout
Video Connector
- video port, location of
Rear Panel Cabling Reference
- VMware
- documentation web site
Configure Network Adapter Settings
- VMware ESXi
- configuring
Gathering the Required Information
- configuring network adapters
Configure Network Adapter Settings
- configuring network interfaces
Configuring Network Interfaces
- installation options
VMware ESXi Installation Options
- post installation tasks
Post-Installation Tasks for VMware ESXi
- setting management port
Configure Network Adapter Settings
- software versions supported
Supported VMware ESXi Software
- voltage
Electrical Power Requirements
W
- web browser interface
Oracle ILOM Service Processor and User Interfaces
- weight of server
Remove the Server From the Rack
- windows deployment services
- Windows OS
Windows Deployment Services
OS Installation
- Windows OS
- ISO images
Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
- supported operating systems
Supported Windows Server Operating Systems
- Windows Server 2012
- media installation
Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
Install Windows Server on a Single System Using Oracle System Assistant
- worksheet
- configuring Oracle Linux
Oracle Linux Configuration Worksheet
- configuring Oracle Solaris
Oracle Solaris Configuration Worksheet
- configuring Oracle VM
Oracle VM
Server Configuration Worksheet
- worksheet, support
Technical
Support Information Worksheet