|
|
|
|
|
|
Oracle ILOM
|
SP firmware
|
Monitors environmental condition and component functionality
sensors, generates alerts, performs fault isolation, and
provides remote access.
|
Can function on either standby power mode or full power mode
and is not OS dependent.
|
Designed for remote and local access.
|
|
Preboot Menu
|
SP firmware
|
Enables you to restore some Oracle ILOM default settings when
Oracle ILOM is not accessible.
|
Can function on standby power and when operating system is not
running.
|
Local, but remote serial access is possible if the SP serial
port is connected to a network-accessible terminal
server.
|
|
Hardware-based LED indicators
|
Hardware and SP firmware
|
Indicates status of overall system and particular components.
|
Available when system power is available.
|
Local, but sensor and indicators are accessible from Oracle
ILOM web interface or command-line interface (CLI).
|
|
Power-On Self-Test (POST)
|
Host firmware
|
Tests core components of system: CPUs, memory, and motherboard
I/O bridge integrated circuits.
|
Runs on startup. Available when the operating system is not
running.
|
Local, but can be accessed through Oracle ILOM Remote System
Console Plus.
|
|
U-Boot
|
SP firmware
|
Initializes and test aspects of the service processor (SP)
prior to booting the Oracle ILOM SP and operating system. Tests
SP memory, SP, network devices and I/O devices.
|
Can function on standby power and when operating system is not
running.
|
Local, but remote serial access is possible if the SP serial
port is connected to a network-accessible terminal
server.
|
|
UEFI Diagnostics
|
SP firmware
|
The UEFI diagnostics can test and detect problems on all
processors, memory, disk drives, and network ports. It is used
on newer Oracle systems, such as the Oracle Server X5-2L.
|
You can use either the Oracle ILOM web interface or the
command-line interface (CLI) to run UEFI diagnostics.
|
Remote access through Oracle ILOM Remote System Console
Plus.
|
|
Oracle Solaris commands
|
Operating system software
|
Displays various kinds of system information.
|
Requires operating system.
|
Local, and over network.
|
|
Oracle Linux commands
|
Operating system software
|
Displays various kinds of system information.
|
Requires operating system.
|
Local, and over network.
|
|
Oracle VTS
|
Diagnostic tool standalone software
|
Exercises and stresses the system, running tests in parallel.
|
Requires the Solaris operating system. Install Oracle VTS
software separately.
|
View and control over network.
|