Remove an NVMe Storage Drive From the Server

Perform this procedure to physically remove an NVMe storage drive from the server.

1. Identify the physical location of the NVMe drive that you want to remove.

   For storage drive locations, see DVD, Storage Drive, and USB Designations.

2. Verify that the blue OK to Remove indicator on the NVMe storage drive is lit.

   See Prepare an NVMe Storage Drive for Removal.

3. On the drive you plan to remove, push the latch release button to open the drive latch.

   See Remove a Storage Drive (CRU).

4. Grasp the latch and pull the drive out of the drive slot.
5. Consider your next steps:

   • If you are replacing the drive, continue to Install an NVMe Storage Drive in the Server.

   • If you are not replacing the drive, install a filler panel in the empty drive slot to maintain proper airflow and perform administrative tasks to configure the server to operate without the drive.

     For information on how to install a storage drive filler panel, see Install a Storage Drive Filler Panel (CRU).