ibping - ping an InfiniBand address
ibping [-d(ebug)] [-e(rr_show)] [-v(erbose)] [-G(uid)] [-C ca_name] [-P ca_port] [-s smlid] [-t(imeout) timeout_ms] [-V(ersion)] [-c ping_count] [-f(lood)] [-o oui] [-S(erver)] [-h(elp)] <dest lid | guid>
IBPING(1m) OpenIB Diagnostics IBPING(1m)
NAME
ibping - ping an InfiniBand address
SYNOPSIS
ibping [-d(ebug)] [-e(rr_show)] [-v(erbose)] [-G(uid)] [-C ca_name] [-P
ca_port] [-s smlid] [-t(imeout) timeout_ms] [-V(ersion)] [-c
ping_count] [-f(lood)] [-o oui] [-S(erver)] [-h(elp)] <dest lid | guid>
DESCRIPTION
ibping uses vendor mads to validate connectivity between IB nodes. On
exit, (IP) ping like output is show. ibping is run as client/server.
Default is to run as client. Note also that a default ping server is
implemented within the kernel.
OPTIONS
-c stop after count packets
-f, --flood
flood destination: send packets back to back without delay
-o, --oui
use specified OUI number to multiplex vendor mads
-S, --Server
start in server mode (do not return)
COMMON OPTIONS
Most OpenIB diagnostics take the following common flags. The exact list
of supported flags per utility can be found in the usage message and
can be shown using the util_name -h syntax.
# Debugging flags
-d raise the IB debugging level.
May be used several times (-ddd or -d -d -d).
-e show send and receive errors (timeouts and others)
-h show the usage message
-v increase the application verbosity level.
May be used several times (-vv or -v -v -v)
-V show the version info.
# Addressing flags
-G use GUID address argument. In most cases, it is the Port GUID.
Example:
"0x08f1040023"
-s <smlid> use 'smlid' as the target lid for SM/SA queries.
# Other common flags:
-C <ca_name> use the specified ca_name.
-P <ca_port> use the specified ca_port.
-t <timeout_ms> override the default timeout for the solicited mads.
Multiple CA/Multiple Port Support
When no IB device or port is specified, the port to use is selected by
the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the user request is attempted to
be fulfilled, and will fail if it is not possible.
AUTHOR
Hal Rosenstock
<halr@voltaire.com>
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+---------------+----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+----------------------+
|Availability | network/open-fabrics |
+---------------+----------------------+
|Stability | Volatile |
+---------------+----------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original community
source was downloaded from ['http://www.openfabrics.org/downloads/ibu-
tils/ibutils-1.5.7.tar.gz', 'http://www.openfabrics.org/down-
loads/libibverbs/libibverbs-1.1.4-1.22.g7257cd3.tar.gz',
'http://www.openfabrics.org/down-
loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz', 'http://www.openfab-
rics.org/downloads/libsdp/libsdp-1.1.108-0.15.gd7fdb72.tar.gz',
'http://www.openfabrics.org/downloads/management/infiniband-
diags-1.5.8.tar.gz', 'http://www.openfabrics.org/downloads/manage-
ment/libibmad-1.3.7.tar.gz', 'http://www.openfabrics.org/downloads/man-
agement/libibumad-1.3.7.tar.gz', 'http://www.openfabrics.org/down-
loads/management/opensm-3.3.9.tar.gz', 'http://www.openfab-
rics.org/downloads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
'http://www.openfabrics.org/down-
loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz', 'http://www.openfab-
rics.org/downloads/rdmacm/librdmacm-1.0.14.1.tar.gz', 'http://www.open-
fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']
Further information about this software can be found on the open source
community website at http://www.openfabrics.org/.
OpenIB August 11, 2006 IBPING(1m)