smpdump - dump InfiniBand subnet management attributes
smpdump [-s(ring)] [-D(irect)] [-C ca_name] [-P ca_port] [-t(imeout) timeout_ms] [-V(ersion)] [-h(elp)] <dlid|dr_path> <attr> [mod]
SMPDUMP(1m) OpenIB Diagnostics SMPDUMP(1m)
NAME
smpdump - dump InfiniBand subnet management attributes
SYNOPSIS
smpdump [-s(ring)] [-D(irect)] [-C ca_name] [-P ca_port] [-t(imeout)
timeout_ms] [-V(ersion)] [-h(elp)] <dlid|dr_path> <attr> [mod]
DESCRIPTION
smpdump is a general purpose SMP utility which gets SM attributes from
a specified SMA. The result is dumped in hex by default.
OPTIONS
attr IBA attribute ID for SM attribute
mod IBA modifier for SM attribute
COMMON OPTIONS
Most OpenIB diagnostics take the following common flags. The exact list
of supported flags per utility can be found in the usage message and
can be shown using the util_name -h syntax.
# Debugging flags
-d raise the IB debugging level.
May be used several times (-ddd or -d -d -d).
-e show send and receive errors (timeouts and others)
-h show the usage message
-v increase the application verbosity level.
May be used several times (-vv or -v -v -v)
-V show the version info.
# Addressing flags
-D use directed path address arguments. The path
is a comma separated list of out ports.
Examples:
"0" # self port
"0,1,2,1,4" # out via port 1, then 2, ...
-G use GUID address argument. In most cases, it is the Port GUID.
Example:
"0x08f1040023"
-s <smlid> use 'smlid' as the target lid for SM/SA queries.
# Other common flags:
-C <ca_name> use the specified ca_name.
-P <ca_port> use the specified ca_port.
-t <timeout_ms> override the default timeout for the solicited mads.
Multiple CA/Multiple Port Support
When no IB device or port is specified, the port to use is selected by
the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the user request is attempted to
be fulfilled, and will fail if it is not possible.
EXAMPLES
Direct Routed Examples
smpdump -D 0,1,2,3,5 16 # NODE DESC
smpdump -D 0,1,2 0x15 2 # PORT INFO, port 2
LID Routed Examples
smpdump 3 0x15 2 # PORT INFO, lid 3 port 2
smpdump 0xa0 0x11 # NODE INFO, lid 0xa0
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+---------------+----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+----------------------+
|Availability | network/open-fabrics |
+---------------+----------------------+
|Stability | Volatile |
+---------------+----------------------+
SEE ALSO
smpquery(1m)
AUTHOR
Hal Rosenstock
<halr@voltaire.com>
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original community
source was downloaded from ['http://www.openfabrics.org/downloads/ibu-
tils/ibutils-1.5.7.tar.gz', 'http://www.openfabrics.org/down-
loads/libibverbs/libibverbs-1.1.4-1.22.g7257cd3.tar.gz',
'http://www.openfabrics.org/down-
loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz', 'http://www.openfab-
rics.org/downloads/libsdp/libsdp-1.1.108-0.15.gd7fdb72.tar.gz',
'http://www.openfabrics.org/downloads/management/infiniband-
diags-1.5.8.tar.gz', 'http://www.openfabrics.org/downloads/manage-
ment/libibmad-1.3.7.tar.gz', 'http://www.openfabrics.org/downloads/man-
agement/libibumad-1.3.7.tar.gz', 'http://www.openfabrics.org/down-
loads/management/opensm-3.3.9.tar.gz', 'http://www.openfab-
rics.org/downloads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
'http://www.openfabrics.org/down-
loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz', 'http://www.openfab-
rics.org/downloads/rdmacm/librdmacm-1.0.14.1.tar.gz', 'http://www.open-
fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']
Further information about this software can be found on the open source
community website at http://www.openfabrics.org/.
OpenIB July 25, 2006 SMPDUMP(1m)