Oracle^® Server X7-8 Service Manual

Prepare the Server for Hot Service (Oracle ILOM Web Interface)

This procedure describes how to prepare the server to remove, replace, or install hot-service components. A hot-service component can be serviced while the server is operating at Main power mode. For more information about component serviceability, see Component Serviceability Requirements.

1. Log in to the service processor Oracle ILOM web interface.

   Direct a web browser to Oracle ILOM using the IP address of the server SP. Log in as a user with root or administrator privileges. See Accessing Oracle ILOM in Oracle Server X7-8 Installation Guide.

   For more information, see Using Oracle ILOM in Oracle Server X7-8 Installation Guide.

   The Summary Information page appears.

2. In the Actions section of the Summary Information page, click the Locator Indicator Turn On button.

   This action activates the Locate Button/LED on the server front panel. For other options, see Managing the Locate Button/LED.

3. Click OK.
4. Once at the service location, press the Locate Button/LED button to deactivate the indicator.

   For more information, see Control the Locate Button/LED Locally.

5. Set up an ESD-safe space at the service location.

   Set up a space where you can place components. See Electrostatic Discharge and Static Prevention Measures.

6. Perform hot-service removal and installation procedures on components.

   See Servicing Components.