Back Panel Connector Locations
The following illustration shows and describes the locations of the back panel
connectors. Use this information to set up the server, so that you can access
diagnostic tools and manage the server during service.
The following figure shows the locations of the server back panel connectors and
ports.
|
|
|
|
1
|
Net management port (NET MGT)
|
System B – SMOD1
|
Dual 4-socket systems only
|
2
|
Serial management port (SER MGT)
|
System B – SMOD1
|
Dual 4-socket systems only
|
3
|
USB 3.0 port
|
System B – SMOD1
|
Dual 4-socket systems only
|
4
|
-
NET0, NET1, NET2, and NET3 ports on dual 4-socket
systems
-
NET0, NET1, NET2, and NET3 ports on single 8-socket
systems
-
Unused ports on single 4-socket systems
|
System B – SMOD1
|
Dual 4-socket and single 8-socket systems
|
5
|
Net management port (NET MGT)
|
System A – SMOD0
|
All systems
|
6
|
Serial management port (SER MGT)
|
System A – SMOD0
|
All systems
|
7
|
USB 3.0 port
|
System A – SMOD0
|
All systems
|
8
|
NET0, NET1, NET2, and NET3 ports on all systems
|
System A – SMOD0
|
All systems
|
9
|
Power connectors 2 and 3
|
System A – SMOD0
|
Always connect all four power supplies. Connect to 200-240 VAC
only.
|
10
|
Power connectors 0 and 1
|
System B –SMOD1
|
Always connect all four power supplies. Connect to 200-240 VAC
only.
|
|