SMOD Components
The following illustration shows an SMOD (system module) and associated
components, including an Oracle Storage 12 Gb SAS PCIe RAID HBA, internal: 16 port
and 2 GB memory card installed below the SMOD, one SAS cable that connects the HBA
card to the server storage backplane, and an ESM extension cable that connects the
energy storage module (ESM) to the HBA card.
|
|
1
|
SAS host bus adaptor (HBA): Oracle Storage 12 Gb SAS PCIe RAID
HBA, internal: 16 port and 2 GB memory
|
2
|
Energy storage module (ESM)
|
3
|
Cable from HBA to ESM
|
4
|
SMOD motherboard
|
5
|
Storage drive SMOD midplane connectors (4)
|
6
|
Four server storage drives 0-3 (HDD/SSD), back panel
accessible
|
7
|
External USB port, back panel accessible
|
8
|
NET MGT ILOM service processor (SP) network management
10/100/1000BASE-T Network port, back panel accessible
|
9
|
Serial management port labeled SER MGT port. IO port, back
panel accessible
|
10
|
NET 0-3 10 GbE network ports labeled NET0, NET1, NET2, and
NET3. Network ports, back panel accessible
|
11
|
Service processor (SP) - concealed location
|
12
|
Real time clock 3V lithium coin cell battery
|
13
|
Real time clock 3V lithium coin cell battery socket
|
14
|
SAS storage drive backplane cable
|
|
For component serviceability, locations, and designations, see Replaceable Components.
For replacement procedures, see Servicing System Module (SMOD) Components (FRU).