After configuring the network addresses for the SP components, power on the server for the first time at the Oracle ILOM prompt. This task requires two connections to the Active SP, one using a serial connection and another using a network connection.
ok #. ->
-> start /Servers/PDomains/PDomain_0/HOST Are you sure you want to start /Servers/PDomains/PDomain_0/HOST (y/n) y
$ ssh root@Active-SP-ip-address
Replace Active-SP-ip-address with the Active SP IP address you set in Set Oracle ILOM Network Addresses. When prompted, type the default changeme root password to log in. Refer to the Oracle ILOM Administrator's Guide for Configuration and Maintenance, configuring local user accounts, for more information.
-> start /Servers/PDomains/PDomain_0/HOST/console Are you sure you want to start /Servers/PDomains/PDomain_0/HOST/console (y/n) y
After connecting to the PDomain_0 console, the Oracle ILOM (->) prompt will not display.
The PDomain0 initialization can take over 30 minutes to complete.
-> show /Servers/PDomains/PDomain_0/HOST status
You can type this command at regular intervals (for example, every 10 minutes) to check the status of the PDomain_0 initialization.
You will be prompted to confirm the configuration several times, enabling confirmation and changes. If you are not sure how to respond to a particular value, you can accept the default, and make future changes when the Oracle Solaris OS is running.
See Oracle Solaris OS Configuration Parameters, and refer to the Installing Oracle Solaris 11.1 Systems document for more information: