Note - The Sun Flash Accelerator F40 PCIe card is cold-service only. See Sun Flash Accelerator F40 PCIe Cards.
If the carrier slides correctly into the slot, you should feel a slight resistance as the carrier starts to seat in the connector.
Caution - Do not push the extraction lever while you insert the carrier into the slot. The carrier can enter at an angle and damage the connectors.
The LEDs on the carrier and the card should remain off at this point.
Note - Refer to the Server Installation for instructions on managing and routing the I/O card cables.
The carrier's LEDs should blink for a few seconds until the PDomain enables the I/O card. The card's LEDs will show activity when the card is enabled.