ibcheckerrs - validate IB port (or node) and report errors in counters above threshold
ibcheckerrs [-h] [-b] [-v] [-G] [-T <threshold_file>] [-s(how_thresh- olds)] [-N | -nocolor] [-C ca_name] [-P ca_port] [-t(imeout) time- out_ms] <lid|guid> <port>
IBCHECKERRS(8) OpenIB Diagnostics IBCHECKERRS(8) NAME ibcheckerrs - validate IB port (or node) and report errors in counters above threshold SYNOPSIS ibcheckerrs [-h] [-b] [-v] [-G] [-T <threshold_file>] [-s(how_thresh- olds)] [-N | -nocolor] [-C ca_name] [-P ca_port] [-t(imeout) time- out_ms] <lid|guid> <port> DESCRIPTION Check specified port (or node) and report errors that surpassed their predefined threshold. Port address is lid unless -G option is used to specify a GUID address. The predefined thresholds can be dumped using the -s option, and a user defined threshold_file (using the same format as the dump) can be specified using the -t <file> option. OPTIONS -G use GUID address argument. In most cases, it is the Port GUID. Example: "0x08f1040023" -s show predefined thresholds -T use specified threshold file -v increase the verbosity level -b brief mode. Reduce the output to show only if errors are present, not what they are. -N | -nocolor use mono rather than color mode -C <ca_name> use the specified ca_name. -P <ca_port> use the specified ca_port. -t <timeout_ms> override the default timeout for the solicited mads. EXAMPLE ibcheckerrs 2 # check aggregated node counter for lid 2 ibcheckerrs 2 4 # check port counters for lid 2 port 4 ibcheckerrs -T xxx 2 # check node using xxx threshold file ATTRIBUTES See attributes(5) for descriptions of the following attributes: +---------------+-----------------------+ |ATTRIBUTE TYPE | ATTRIBUTE VALUE | +---------------+-----------------------+ |Availability | network/open-fabrics | +---------------+-----------------------+ |Stability | Pass-through volatile | +---------------+-----------------------+ SEE ALSO perfquery(8), ibaddr(8) AUTHOR Hal Rosenstock <halr@voltaire.com> NOTES This software was built from source available at https://java.net/projects/solaris-userland. The original community source was downloaded from ['http://download.oracle.com/otn- pub/oss/networking/libsif-1.0.tar.gz', 'https://www.openfab- rics.org/downloads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfabrics.org/downloads/libibverbs/libib- verbs-1.1.8.tar.gz', 'https://www.openfabrics.org/down- loads/libmlx4/libmlx4-1.0.6.tar.gz', 'https://www.openfabrics.org/down- loads/libsdp/libsdp-1.1.108-0.15.gd7fdb72.tar.gz', 'https://www.open- fabrics.org/downloads/management/infiniband-diags-1.6.5.tar.gz', 'https://www.openfabrics.org/downloads/management/libib- mad-1.3.12.tar.gz', 'https://www.openfabrics.org/downloads/manage- ment/libibumad-1.3.10.2.tar.gz', 'https://www.openfabrics.org/down- loads/management/opensm-3.3.19.tar.gz', 'https://www.openfab- rics.org/downloads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.openfabrics.org/downloads/qperf/qperf-0.4.9.tar.gz', 'https://www.openfabrics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz', 'https://www.openfabrics.org/downloads/rds-tools/rds- tools-2.0.4.tar.gz'] Further information about this software can be found on the open source community website at http://www.openfabrics.org/. OpenIB May 30, 2007 IBCHECKERRS(8)