smpdump - Man page for 'smpdump' in section 1m
Please see following description for synopsis
SMPDUMP(8) Open IB Diagnostics SMPDUMP(8)
NAME
SMPDUMP -
DUMP INFINIBAND SUBNET MANAGEMENT ATTRIBUTES
SYNOPSIS
smpdump [options] <dlid|dr_path> <attribute> [attribute_modifier]
DESCRIPTION
smpdump is a general purpose SMP utility which gets SM attributes from
a specified SMA. The result is dumped in hex by default.
OPTIONS
dlid|drpath
LID or DR path to SMA
attribute
IBA attribute ID for SM attribute
attribute_modifier
IBA modifier for SM attribute
-s, --string
Print strings in packet if possible
Addressing Flags
-D, --Direct The address specified is a directed route
Examples:
[options] -D [options] "0" # self port
[options] -D [options] "0,1,2,1,4" # out via port 1, then 2, ...
(Note the second number in the path specified must match the port being
used. This can be specified using the port selection flag '-P' or the
port found through the automatic selection process.)
-L, --Lid The address specified is a LID
Port Selection flags
-C, --Ca <ca_name> use the specified ca_name.
-P, --Port <ca_port> use the specified ca_port.
Local port Selection
Multiple port/Multiple CA support: when no IB device or port is speci-
fied (see the "local umad parameters" below), the libibumad library
selects the port to use by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the libibumad library
attempts to fulfill the user request, and will fail if it is not
possible.
For example:
ibaddr # use the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from "mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.
Debugging flags
-d raise the IB debugging level. May be used several times (-ddd
or -d -d -d).
-e show send and receive errors (timeouts and others)
-h, --help show the usage message
-v, --verbose
increase the application verbosity level. May be used several
times (-vv or -v -v -v)
-V, --version show the version info.
Configuration flags
-t, --timeout <timeout_ms> override the default timeout for the
solicited mads.
--config, -z <config_file> Specify alternate config file.
Default: /etc/infiniband/infiniband-diags/ibdiag.conf
FILES
CONFIG FILE
/etc/infiniband/infiniband-diags/ibdiag.conf
A global config file is provided to set some of the common options for
all tools. See supplied config file for details.
EXAMPLES
Direct Routed Examples
:: smpdump -D 0,1,2,3,5 16 # NODE DESC smpdump -D 0,1,2 0x15 2 #
PORT INFO, port 2
LID Routed Examples
:: smpdump 3 0x15 2 # PORT INFO, lid 3 port 2 smpdump 0xa0
0x11 # NODE INFO, lid 0xa0
SEE ALSO
smpquery (8)
AUTHOR
Hal Rosenstock
< halr@voltaire.com >
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+---------------+-----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+-----------------------+
|Availability | network/open-fabrics |
+---------------+-----------------------+
|Stability | Pass-through volatile |
+---------------+-----------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original community
source was downloaded from ['http://download.oracle.com/otn-
pub/oss/networking/libsif-1.0.tar.gz', 'https://www.openfab-
rics.org/downloads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz',
'https://www.openfabrics.org/downloads/libibverbs/libib-
verbs-1.1.8.tar.gz', 'https://www.openfabrics.org/down-
loads/libmlx4/libmlx4-1.0.6.tar.gz', 'https://www.openfabrics.org/down-
loads/libsdp/libsdp-1.1.108-0.15.gd7fdb72.tar.gz', 'https://www.open-
fabrics.org/downloads/management/infiniband-diags-1.6.5.tar.gz',
'https://www.openfabrics.org/downloads/management/libib-
mad-1.3.12.tar.gz', 'https://www.openfabrics.org/downloads/manage-
ment/libibumad-1.3.10.2.tar.gz', 'https://www.openfabrics.org/down-
loads/management/opensm-3.3.19.tar.gz', 'https://www.openfab-
rics.org/downloads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
'https://www.openfabrics.org/downloads/qperf/qperf-0.4.9.tar.gz',
'https://www.openfabrics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz',
'https://www.openfabrics.org/downloads/rds-tools/rds-
tools-2.0.4.tar.gz']
Further information about this software can be found on the open source
community website at http://www.openfabrics.org/.
SMPDUMP(8)