Go to main content

man pages section 1M: System Administration Commands

Exit Print View

Updated: July 2017
 
 

saquery (1m)

Name

saquery - Man page for 'saquery' in section 1m

Synopsis

Please see following description for synopsis

Description

SAQUERY(8)                    Open IB Diagnostics                   SAQUERY(8)



NAME
       SAQUERY -

QUERY INFINIBAND SUBNET ADMINISTRATION ATTRIBUTES
   SYNOPSIS
       saquery [options] [<name> | <lid> | <guid>]

   DESCRIPTION
       saquery  issues  the  selected  SA  query.  Node records are queried by
       default.

   OPTIONS
       -p     get PathRecord info

       -N     get NodeRecord info

       -D, --list
              get NodeDescriptions of CAs only

       -S     get ServiceRecord info

       -I     get InformInfoRecord (subscription) info

       -L     return the Lids of the name specified

       -l     return the unique Lid of the name specified

       -G     return the Guids of the name specified

       -O     return the name for the Lid specified

       -U     return the name for the Guid specified

       -c     get the SA's class port info

       -s     return the PortInfoRecords with isSM or isSMdisabled  capability
              mask bit on

       -g     get multicast group info

       -m     get  multicast  member info.  If a group is specified, limit the
              output to the group specified and print one line containing only
              the  GUID  and node description for each entry. Example: saquery
              -m 0xc000

       -x     get LinkRecord info

       --src-to-dst <src:dst>
              get a PathRecord for <src:dst> where src and dst are either node
              names or LIDs

       --sgid-to-dgid <sgid:dgid>
              get a PathRecord for sgid to dgid where both GIDs are in an IPv6
              format acceptable to inet_pton (3)

       --smkey <val>
              use SM_Key value for the query. Will be used only with "trusted"
              queries.   If  non-numeric  value  (like  'x') is specified then
              saquery will prompt for a value.  Default  (when  not  specified
              here  or  in /etc/infiniband/infiniband-diags/ibdiag.conf) is to
              use SM_Key == 0 (or "untrusted")

       -K, --show_keys
              show security keys  (mkey,  smkey,  etc.)  associated  with  the
              request.

       --slid <lid> Source LID (PathRecord)

       --dlid <lid> Destination LID (PathRecord)

       --mlid <lid> Multicast LID (MCMemberRecord)

       --sgid <gid> Source GID (IPv6 format) (PathRecord)

       --dgid <gid> Destination GID (IPv6 format) (PathRecord)

       --gid <gid> Port GID (MCMemberRecord)

       --mgid <gid> Multicast GID (MCMemberRecord)

       --reversible Reversible path (PathRecord)

       --numb_path Number of paths (PathRecord)

       --pkey  P_Key  (PathRecord, MCMemberRecord). If non-numeric value (like
       'x')
              is specified then saquery will prompt for a value

       --qos_class QoS Class (PathRecord)

       --sl Service level (PathRecord, MCMemberRecord)

       --mtu MTU and selector (PathRecord, MCMemberRecord)

       --rate Rate and selector (PathRecord, MCMemberRecord)

       --pkt_lifetime Packet  lifetime  and  selector  (PathRecord,  MCMember-
       Record)

       --qkey Q_Key (MCMemberRecord). If non-numeric value (like 'x') is spec-
       ified
              then saquery will prompt for a value

       --tclass Traffic Class (PathRecord, MCMemberRecord)

       --flow_label Flow Label (PathRecord, MCMemberRecord)

       --hop_limit Hop limit (PathRecord, MCMemberRecord)

       --scope Scope (MCMemberRecord)

       --join_state Join state (MCMemberRecord)

       --proxy_join Proxy join (MCMemberRecord)

       --service_id ServiceID (PathRecord)

       Supported query names (and aliases):

          ClassPortInfo (CPI)
          NodeRecord (NR) [lid]
          PortInfoRecord (PIR) [[lid]/[port]/[options]]
          SL2VLTableRecord (SL2VL) [[lid]/[in_port]/[out_port]]
          PKeyTableRecord (PKTR) [[lid]/[port]/[block]]
          VLArbitrationTableRecord (VLAR) [[lid]/[port]/[block]]
          InformInfoRecord (IIR)
          LinkRecord (LR) [[from_lid]/[from_port]] [[to_lid]/[to_port]]
          ServiceRecord (SR)
          PathRecord (PR)
          MCMemberRecord (MCMR)
          LFTRecord (LFTR) [[lid]/[block]]
          MFTRecord (MFTR) [[mlid]/[position]/[block]]
          GUIDInfoRecord (GIR) [[lid]/[block]]
          SwitchInfoRecord (SWIR) [lid]
          SMInfoRecord (SMIR) [lid]

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple port/Multiple CA support: when no IB device or port is  speci-
       fied  (see  the  "local  umad parameters" below), the libibumad library
       selects the port to use by the following criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If a port  and/or  CA  name  is  specified,  the  libibumad  library
          attempts  to  fulfill  the  user request, and will fail if it is not
          possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags
       -d     raise the IB debugging level.  May be used several  times  (-ddd
              or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase  the  application verbosity level.  May be used several
              times (-vv or -v -v -v)

       -V, --version     show the version info.

   Configuration flags
       -t,  --timeout  <timeout_ms>  override  the  default  timeout  for  the
       solicited mads.

       --outstanding_smps, -o <val>
              Specify  the  number of outstanding SMP's which should be issued
              during the scan

              Default: 2

       --node-name-map <node-name-map> Specify a node name map.
          This file maps GUIDs to more user friendly names.   See  FILES  sec-
          tion.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband/infiniband-diags/ibdiag.conf

   COMMON FILES
   CONFIG FILE
       /etc/infiniband/infiniband-diags/ibdiag.conf

       A  global config file is provided to set some of the common options for
       all tools.  See supplied config file for details.

   NODE NAME MAP FILE FORMAT
       The node name map is used to specify user friendly names for  nodes  in
       the output.  GUIDs are used to perform the lookup.

       This  functionality  is  provided  by  the  opensm-libs  package.   See
       opensm(8) for the file location for your installation.

       Generically:

          # comment
          <guid> "<name>"

       Example:

          # IB1
          # Line cards
          0x0008f104003f125c "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f125d "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d2 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d3 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

          # Spines
          0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

          # GUID   Node Name
          0x0008f10400411a08 "SW1  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a28 "SW2  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a34 "SW3  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f104004119d0 "SW4  (Rack  3) ISR9024 Voltaire 9024D"

   DEPENDENCIES
       OpenSM (or other running SM/SA), libosmcomp, libibumad, libibmad

   AUTHORS
       Ira Weiny
              < ira.weiny@intel.com >

       Hal Rosenstock
              < halr@mellanox.com >



ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | network/open-fabrics  |
       +---------------+-----------------------+
       |Stability      | Pass-through volatile |
       +---------------+-----------------------+
NOTES
       This    software    was    built    from    source     available     at
       https://java.net/projects/solaris-userland.    The  original  community
       source   was   downloaded    from     ['http://download.oracle.com/otn-
       pub/oss/networking/libsif-1.0.tar.gz',            'https://www.openfab-
       rics.org/downloads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz',
       'https://www.openfabrics.org/downloads/libibverbs/libib-
       verbs-1.1.8.tar.gz',                 'https://www.openfabrics.org/down-
       loads/libmlx4/libmlx4-1.0.6.tar.gz', 'https://www.openfabrics.org/down-
       loads/libsdp/libsdp-1.1.108-0.15.gd7fdb72.tar.gz',   'https://www.open-
       fabrics.org/downloads/management/infiniband-diags-1.6.5.tar.gz',
       'https://www.openfabrics.org/downloads/management/libib-
       mad-1.3.12.tar.gz',      'https://www.openfabrics.org/downloads/manage-
       ment/libibumad-1.3.10.2.tar.gz',     'https://www.openfabrics.org/down-
       loads/management/opensm-3.3.19.tar.gz',           'https://www.openfab-
       rics.org/downloads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
       'https://www.openfabrics.org/downloads/qperf/qperf-0.4.9.tar.gz',
       'https://www.openfabrics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz',
       'https://www.openfabrics.org/downloads/rds-tools/rds-
       tools-2.0.4.tar.gz']

       Further information about this software can be found on the open source
       community website at http://www.openfabrics.org/.



                                                                    SAQUERY(8)