Sun Server X4-4 HTML Documentation Collection

Test IPv4 or IPv6 Network Configuration From the Oracle ILOM CLI

1. Use the cd command to navigate to the /SP/network/test directory:

   -> cd /SP/network/test

2. At the CLI prompt, type the show command to view the network test targets and properties.

   For example, the following output shows the test target properties.

   -> show
   /SP/network/test
   Targets:
   
   Properties:
    ping = (Cannot show property)
    ping6 = (Cannot show property)
   
   Commands:
    cd
    set
    show

3. Use the set ping or set ping6 command to send a network test from the device to a network destination. For example:

   -> set ping=device_ipv4_address_on network

   -> set ping6=device_ipv6_address_on network

   Property Value to Set Description ping <IPv4_address> Type the set ping= command at the command prompt followed by the IPv4 test destination address. For example: set ping=10.8.183.106 Ping of 10.8.183.106 succeeded ping6 <IPv6_address> Type the set ping6= command followed by the IPv6 test destination address. For example: set ping6=fe80::211:5dff:febe:5000 Ping of fe80::211:5dff:febe:5000 succeeded