Rack Compatibility
Check that your rack is compatible with the slide-rail and cable management arm (CMA) options.
The optional slide-rails are compatible with a wide range of equipment racks that meet the standards
shown in the following table.
|
|
Structure
|
Four-post rack (mounting at both front and rear). Two-post racks are not compatible.
|
Rack horizontal opening and unit vertical pitch
|
Conforms to ANSI/EIA 310-D-1992 or IEC 60927 standards. Only M6 tapped or 9.5 mm square holes
are supported.
|
Distance between front and rear mounting planes
|
Minimum 610 mm and maximum 915 mm (24 inches to 36 inches).
|
Clearance depth in front of front mounting plane
|
Distance to front cabinet door is at least 25.4 mm (1 inch).
|
Clearance depth behind front mounting plane
|
Distance to rear cabinet door is at least 900 mm (35.5 inches) with the cable management arm,
or 770 mm (30.4 inches) without the cable management arm.
|
Clearance width between front and rear mounting planes
|
Distance between structural supports and cable troughs is at least 456 mm (18 inches).
|
Server dimensions
|
Depth: (not including PSU ejectors): 732 mm (28.8 inches).
Width: (not including ears): 436.5 mm (17.2 inches).
Height: 129.9 mm (5.1 inches).
|
|