When servicing the components in this section, unplug the AC power cords and use ESD protection.
Use this procedure to install a memory riser (MR) card into its slot.
Before You Begin
For serviceability considerations, see Component Serviceability.
For DIMM designation information, see Component Designations.
For reference information, see Memory Riser Card and DIMM Reference.
Caution - Component damage. Open DIMM ejector levers can break off during the installation of the memory riser (MR) card. All populated and unpopulated DIMM slot ejector levers on the MR card must be in the fully-closed and locke position before installing the card in the server. |
The ejector levers are only used to remove a MR card and are not used to install a card.
The DIMMs on the card must face the left (when positioned at the front of the server).
This action seats the card within the connector on the motherboard.
See Also