dtrmm - matrix operations B := alpha*op( A )*B, or B := alpha*B*op( A )
SUBROUTINE DTRMM(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB) CHARACTER*1 SIDE, UPLO, TRANSA, DIAG INTEGER M, N, LDA, LDB DOUBLE PRECISION ALPHA DOUBLE PRECISION A(LDA,*), B(LDB,*) SUBROUTINE DTRMM_64(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB) CHARACTER*1 SIDE, UPLO, TRANSA, DIAG INTEGER*8 M, N, LDA, LDB DOUBLE PRECISION ALPHA DOUBLE PRECISION A(LDA,*), B(LDB,*) F95 INTERFACE SUBROUTINE TRMM(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB) CHARACTER(LEN=1) :: SIDE, UPLO, TRANSA, DIAG INTEGER :: M, N, LDA, LDB REAL(8) :: ALPHA REAL(8), DIMENSION(:,:) :: A, B SUBROUTINE TRMM_64(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB) CHARACTER(LEN=1) :: SIDE, UPLO, TRANSA, DIAG INTEGER(8) :: M, N, LDA, LDB REAL(8) :: ALPHA REAL(8), DIMENSION(:,:) :: A, B C INTERFACE #include <sunperf.h> void dtrmm(char side, char uplo, char transa, char diag, int m, int n, double alpha, double *a, int lda, double *b, int ldb); void dtrmm_64(char side, char uplo, char transa, char diag, long m, long n, double alpha, double *a, long lda, double *b, long ldb);
Oracle Solaris Studio Performance Library dtrmm(3P)
NAME
dtrmm - perform one of the matrix-matrix operations B := alpha*op( A
)*B, or B := alpha*B*op( A )
SYNOPSIS
SUBROUTINE DTRMM(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B,
LDB)
CHARACTER*1 SIDE, UPLO, TRANSA, DIAG
INTEGER M, N, LDA, LDB
DOUBLE PRECISION ALPHA
DOUBLE PRECISION A(LDA,*), B(LDB,*)
SUBROUTINE DTRMM_64(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B,
LDB)
CHARACTER*1 SIDE, UPLO, TRANSA, DIAG
INTEGER*8 M, N, LDA, LDB
DOUBLE PRECISION ALPHA
DOUBLE PRECISION A(LDA,*), B(LDB,*)
F95 INTERFACE
SUBROUTINE TRMM(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA,
B, LDB)
CHARACTER(LEN=1) :: SIDE, UPLO, TRANSA, DIAG
INTEGER :: M, N, LDA, LDB
REAL(8) :: ALPHA
REAL(8), DIMENSION(:,:) :: A, B
SUBROUTINE TRMM_64(SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A,
LDA, B, LDB)
CHARACTER(LEN=1) :: SIDE, UPLO, TRANSA, DIAG
INTEGER(8) :: M, N, LDA, LDB
REAL(8) :: ALPHA
REAL(8), DIMENSION(:,:) :: A, B
C INTERFACE
#include <sunperf.h>
void dtrmm(char side, char uplo, char transa, char diag, int m, int n,
double alpha, double *a, int lda, double *b, int ldb);
void dtrmm_64(char side, char uplo, char transa, char diag, long m,
long n, double alpha, double *a, long lda, double *b, long
ldb);
PURPOSE
dtrmm performs one of the matrix-matrix operations B := alpha*op( A
)*B, or B := alpha*B*op( A ) where alpha is a scalar, B is an m by
n matrix, A is a unit, or non-unit, upper or lower triangular matrix
and op( A ) is one of
op( A ) = A or op( A ) = A'.
ARGUMENTS
SIDE (input)
On entry, SIDE specifies whether op( A ) multiplies B from
the left or right as follows:
SIDE = 'L' or 'l' B := alpha*op( A )*B.
SIDE = 'R' or 'r' B := alpha*B*op( A ).
Unchanged on exit.
UPLO (input)
On entry, UPLO specifies whether the matrix A is an upper or
lower triangular matrix as follows:
UPLO = 'U' or 'u' A is an upper triangular matrix.
UPLO = 'L' or 'l' A is a lower triangular matrix.
Unchanged on exit.
TRANSA (input)
On entry, TRANSA specifies the form of op( A ) to be used in
the matrix multiplication as follows:
TRANSA = 'N' or 'n' op( A ) = A.
TRANSA = 'T' or 't' op( A ) = A'.
TRANSA = 'C' or 'c' op( A ) = A'.
Unchanged on exit.
DIAG (input)
On entry, DIAG specifies whether or not A is unit triangular
as follows:
DIAG = 'U' or 'u' A is assumed to be unit triangular.
DIAG = 'N' or 'n' A is not assumed to be unit triangular.
Unchanged on exit.
M (input)
On entry, M specifies the number of rows of B. M >= 0.
Unchanged on exit.
N (input)
On entry, N specifies the number of columns of B. N >= 0.
Unchanged on exit.
ALPHA (input)
On entry, ALPHA specifies the scalar alpha. When alpha is
zero then A is not referenced and B need not be set before
entry. Unchanged on exit.
A (input)
DOUBLE PRECISION array of DIMENSION ( LDA, k ), where k is m
when SIDE = 'L' or 'l' and is n when SIDE = 'R' or 'r'.
Before entry with UPLO = 'U' or 'u', the leading k by k
upper triangular part of the array A must contain the upper
triangular matrix and the strictly lower triangular part of
A is not referenced.
Before entry with UPLO = 'L' or 'l', the leading k by k
lower triangular part of the array A must contain the lower
triangular matrix and the strictly upper triangular part of
A is not referenced.
Note that when DIAG = 'U' or 'u', the diagonal elements of
A are not referenced either, but are assumed to be one.
Unchanged on exit.
LDA (input)
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When SIDE = 'L' or 'l' then
LDA >= max( 1, m ), when SIDE = 'R' or 'r' then LDA >= max(
1, n ). Unchanged on exit.
B (input/output)
DOUBLE PRECISION array of DIMENSION ( LDB, n ). Before
entry, the leading m by n part of the array B must contain
the matrix B, and on exit is overwritten by the trans-
formed matrix.
LDB (input)
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. LDB >= max( 1, m ).
Unchanged on exit.
7 Nov 2015 dtrmm(3P)