ios - basic iostreams formatting
#include <iostream.h> class unsafe_ios { public: // exported types // stream status bits
enum io_state { goodbit = 0x00, // no bit set: all is ok eofbit = 0x01, // at end of file failbit = 0x02, // last I/O operation failed badbit = 0x04, // invalid operation attempted hardfail = 0x80 // unrecoverable error };
// stream operation mode enum open_mode { in = 0x01, // open for reading out = 0x02, // open for writing ate = 0x04, // seek to eof upon original open app = 0x08, // append mode: all additions at eof trunc = 0x10, // truncate file if already exists nocreate = 0x20, // open fails if file doesn't exist noreplace= 0x40 // open fails if file already exists };
// stream seek direction enum seek_dir { beg=0, cur=1, end=2 };
// formatting flags enum { skipws = 0x0001, // skip whitespace on input left = 0x0002, // left-adjust output right = 0x0004, // right-adjust output internal = 0x0008, // padding after sign or base indicator dec = 0x0010, // decimal conversion oct = 0x0020, // octal conversion hex = 0x0040, // hexidecimal conversion showbase = 0x0080, // use base indicator on output showpoint = 0x0100, // force decimal point (floating output) uppercase = 0x0200, // upper-case hex output showpos = 0x0400, // add '+' to positive integers scientific= 0x0800, // use 1.2345E2 floating notation fixed = 0x1000, // use 123.45 floating notation unitbuf = 0x2000, // flush all streams after insertion stdio = 0x4000 // flush stdout, stderr after insertion };
public: // exported functions // format-related functions long flags(); long flags(long bits); long setf(long setbits, long field); long setf(long setbits); long unsetf(long unsetbits); int width(); int width(int len); char fill(); char fill(char ch); int precision(int len); int precision(); int skip(int doskip); // obsolete // state-related functions int rdstate(); int eof(); int fail(); int bad(); int good(); void clear(int state=0); // other functions ostream* tie(ostream* tiedstream); ostream* tie(); streambuf* rdbuf(); static long bitalloc(); static int xalloc(); long & iword(int index); void* & pword(int index); static void sync_with_stdio(); public: // exported operator and conversion functions operator void* (); int operator ! (); public: // exported constructor, destructor unsafe_ios(streambuf* sbp); virtual ~unsafe_ios(); public: // exported data members static const long basefield; // dec | oct | hex static const long adjustfield; // left | right | internal static const long floatfield; // scientific | fixed protected: // protected function void init(streambuf* sbp); // protected constructor unsafe_ios(); void setstate (int); static void (*stdioflush)(); private: // private members to prevent copying unsafe_ios(unsafe_ios&); void operator= (unsafe_ios&); };
class ios : virtual public unsafe_ios, public stream_MT { public: // format-related functions long flags(); long flags(long); long setf(long setbits, long field); long setf(long); long unsetf(long); int width(); int width(int); char fill(); char fill(char); int precision(); int precision(int); // state-related functions int rdstate(); int eof(); int fail(); int bad(); int good(); void clear(int state =0); // other functions ostream* tie(); ostream* tie(ostream*); streambuf* rdbuf(); static long bitalloc(); static int xalloc(); long& iword(int); void* & pword(int); static void sync_with_stdio(); public: // exported operator and conversion functions operator void*(); int operator!(); public: // exported operator and conversion functions ios(streambuf* sbp); virtual ~ios(); protected: init(streambuf* sbp); ios(); setstate(int); static void (*stdioflush)(); protected: static stream_rmutex static_mutlock; static int mutex_init_count; private: ios(ios&); void operator=(ios&) ; };
// Predefined manipulators unsafe_ostream& endl(unsafe_ostream&); unsafe_ostream& ends(unsafe_ostream&); unsafe_ostream& flush(unsafe_ostream&); ostream& endl(ostream&); ostream& ends(ostream&); ostream& flush(ostream&); unsafe_ios& dec(unsafe_ios&); unsafe_ios& hex(unsafe_ios&); unsafe_ios& oct(unsafe_ios&); ios& dec(ios&); ios& hex(ios&); ios& oct(ios&); unsafe_istream& ws(unsafe_istream&); istream& ws(istream&);
Class ios is a virtual base class of all stream objects. It provides the basic state and formatting data for a stream. Several enumerations are defined, and a large collection of functions. These are described below.
Class unsafe_ios implements all of the functionality of this class. Class ios is a "wrapper" class that implements mutex locks around each of the member functions of unsafe_ios to protect against access by multiple threads. Use of the protected class does not guarantee mt-safety, however; for more information on making your application mt-safe, see the C++ Library Reference Chapter 4, "Using Classic iostream in a Multithreaded Environment."
Member functions use these enumerations to keep track of the error state of the stream. See also the ``Error States'' section below for how to test these bits. io_state is really a collection of bits, as follows:
This ``bit'' is really the absence of any error bits, and indicates that the stream is in a good state.
This bit is normally set when end of file has been reached during an extraction. It is not set as the result of a succesful extraction reaching end of file, but when end of file is reached while attempting further extractions. ``End of file'' in this sense is an abstraction as defined by the streambuf associated with the stream. Normally this bit is not set for output streams.
This bit is set when an attempted extraction or conversion has failed, usually due to unexpected characters. Further attempted extractions will fail until this bit is cleared, to prevent running on after improper input. Usually the stream is still usable, and extraction may be continued after clearing the bit and dealing with the unexpected input.
This bit indicates that some operation on the associated streambuf has failed. Typically, attempting further operations will not succeed, even after clearing the bit. Example situations would be an output error, or immediate end of file on an attempted input operation.
This bit is reserved to the implementation to indicate that the stream cannot be further used. Typically it represents a hardware failure of some kind. The bit cannot be cleared by any publicly-accessible function.
These enumerations are described in fstream(3CC4), under the description of function open().
These enumerations are described in sbufpub(3CC4), under the description of function seekoff().
Member functions use these enumerations of anonymous type to control input and output formatting. See the "Format Control" section below.
The streambuf pointed to by sbp becomes the streambuf associated with the ios being constructed. The pointer must not be null.
Historically, a virtual base class required a default constructor (one with no arguments), because there used to be no way to pass arguments to a constructor for a virtual base class. Class ios therefore has a default constructor and a separate intialization function taking a pointer to a streambuf. A derived class uses the protected constructor ios() by default, and calls initialization function init(streambuf*). The argument to init points to the streambuf to be associated with the ios being constructed, and must not be null. Example:
class istream : virtual public ios { ... }; istream::istream(streambuf* s) { ios::init(s); // ... }
The copy constructor and assignment operator are private to prevent copying of ios objects, since the effect of such copying is not well defined. Usually you want to copy a pointer to the object, or pass a reference to a function.
Several functions enable testing and adjusting the error state bits, as follows.
Returns the error state bits of stream s as an int.
Stores its int parameter as the error state of stream s. The value of state should be derived only from the return of rdstate and/or combinations of the io_state bits. To clear only one bit in the stream state, use something like s.clear(~ios::failbit & s.rdstate());
Returns non-zero if the error state is good; that is, if no bits are set. Otherwise, returns zero. In particular, returns zero if eofbit is set.
Returns non-zero if the eofbit is set, zero otherwise.
Returns non-zero if any of failbit, badbit, or hardfail is set, zero otherwise.
Returns non-zero if either of badbit or hardfail is set, zero otherwise.
It is often convenient to be able to test the state of a stream directly. Since typical insertion and extraction operators return a reference to the stream, you can test the return values of the operations. Two operators are defined to permit this testing.
You may use an explict cast of a stream to void*, or use a stream in a boolean context to test its state. The result is 0 if any of failbit, badbit, or hardfail is set. The result is a non-zero pointer if the stream is in a good or eof state. Examples:
if( cout ) ... // next output will probably succeed if( cin >> x ) ... // input to x succeeded
This operator provides the inverse of the above testing. The result is non-zero if any of failbit, badbit, or hardfail is set, zero otherwise. Examples:
if( ! cout ) ... // output will not succeed if( ! (cin >> x) ) ... // input to x failed
A ios maintains a format state which is controlled by formatting flags, and the three functions fill(), width(), and precision(). The formatting flags are a collection of bits described below, declared as enumerations of an anonymous type. These format state bits are kept in a long int and may be manipulated independently via two versions of the flags() function.
The formatting flags may be set and cleared independent of other operations. They change only by explicit programmer action. The flags are as follows:
If this flag is set, formatted extractors will skip leading whitespace; otherwise, leading whitespace is not skipped. This flag is set by default, allowing free-format input text. Unformatted extractors do not examine this flag.
These flags control how padding is inserted during formatted operations. At most one of these three flags may be set at one time. The three flags may be addressed as a unit by the static member ios::adjustfield. If left is set, the value is left-adjusted in its field width, meaning that padding is added on the right. If right is set, the value is right-adjusted in its field width, meaning that padding is added on the left. If internal is set, padding is added after any leading base or sign field, and before the value. The default (none of the flags set) is right. The fill character used for padding defaults to the space character, and may be set with the fill function. The amount of padding is determined by the field width as set by the width function. See also manip(3CC4).
These flags control the conversion base of integer data. At most one of these three flags may be set at one time. The three flags may be addressed as a unit by the static member ios::basefield. Conversions are done in decimal (base 10) if dec is set, in octal (base 8) if oct is set, or in hexadecimal (base 16) if hex is set. If none of the flags is set, insertions are done in decimal, and extractions are converted according to the C++ rules for representing integer constants. That is, a leading ``0x'' or ``0X'' will result in hex conversion, a leading `0' will result in octal conversion, and a leading `1' through `9' will result in decimal conversion for extraction. The default is none of these bits set. The manipulators dec, oct, and hex may also be used to set the conversion base as described below in section ``Predefined Manipulators''.
If this flag is set, insertions of converted integral values will be in the form used for representing C++ integer constants. That is, octal values will begin with a leading `0', and hexadecimal values will begin with a leading ``0x'' or ``0X''. (See ``uppercase'' below.) The default is unset.
If this flag is set, a plus sign (`+') will be added to insertions of converted positive decimal values (including floating-point). The default is unset.
If this flag is set, an uppercase `X' will be used in insertions of converted hexidecimal values when showbase is set, and an uppercase `E' will be used for floating-point conversions. Otherwise, lowercase `x' and `e' will be used, respectively. The default is unset.
These flags control the type of conversion used when floating-point values are converted for insertion. The two flags may be addressed as a unit by the static member ios::floatfield. The rules followed for conversion are generally the same as for the C stdio function printf. (See printf(3c).) If scientific is set, `e' format is used. If fixed is set, `f' format is used. If neither is set, `g' format is used. (See also uppercase above.) The value set by width, if any, is used as the printf field width specification. The value set by precision, if any, is used as the printf precision specification.
If this flag is set, trailing zeros, or a trailing decimal point, will appear in the conversion of floating-point values. The default is to truncate trailing zeros or a trailing decimal point.
If an output stream is buffered, the buffer is flushed when it fills, or when it is explicitly flushed. This can result in delayed output, or lost output if the program should crash. A stream may be unbuffered, eliminating delays and lost output, but at the cost of a system call per character output. If the unitbuf is set, the buffer will be flushed after each complete insertion. Unit buffering is thus a compromise, providing frequent output at lower cost than unbuffered output, and not requiring extra flush calls in the program source. In particular, unit buffering may be turned on and off at selected places in the code without changing any other source code. By default, this flag is not set.
This flag causes the C stdio files stdout and stderr to be flushed after each insertion in the stream. This may be useful when C stdio on the standard files is mixed with iostreams on other files. By default, this flag is not set.
The format control functions are as follows:
Returns the current formatting flags of stream s in a long.
Uses the long value of newflags to replace all the formatting flags in stream s. Returns the previous formatting flags in a long.
Each bit which is set in the long value newflags is set in the formatting flags of stream s. The remaining formatting flags are unaffected. Returns the previous formatting flags in a long. Note the flags function replaces all the flag bits, while the setf function sets just those bits which are specified. This version of setf is most useful for setting a flag which is not part of a group. See the second form of this function below for setting one of a group of flags.
The bits which are set in the long value field mark the formatting flags which are replaced by the corresponding bits in the long value newflags. Returns the previous value of the designated flags. Typically, one of the constants basefield, adjustfield, or floatfield is used as the value of field. Example - set to left-justification, output a value, and restore the previous justification:
long oldadjust = cout.setf(ios::left, ios::adjustfield); cout << data; cout.setf(oldadjust, ios::adjustfield);
This technique ensures that only one of the adjustfield bits is ever set, and allows convenient restoration of the previous status. Using zero for the new value of the field will clear just those flags. Example - clear the integer conversion base to the default state:
cout.setf(0, ios::basefield);
See also the manipulators setiosflags and resetiosflags in manip(3CC4).
Each bit which is set in the long value newflags is unset in the formatting flags of stream s. The remaining formatting flags are unaffected. Returns the previous formatting flags in a long. Note the setf function sets corresponding flag bits, while the unsetf function clears them. See also the manipulator resetiosflags in manip (3CC4) .
Returns the current fill character of stream s. The fill character is used for padding an insertion to the designated field width. This release supports only single-byte characters for fill. See the discussion above for left, right, and internal.
Sets the fill character of stream s to newfill and returns the old fill character. The default fill character is the space. See also the manipulator setfill in manip(3CC4).
Returns the current ``precision'' format state of stream s. It controls the number of significant digits converted in floating-point insertions. See the discussion above for scientific and fixed.
Sets the ``precision'' format state of stream s to newprec, and returns the old value. The default value is 6. See also the manipulator setprecision in manip(3CC4).
Returns the current ``field width'' format state of stream s. If the field width is zero, inserters will insert only the characters necessary to represent the value being inserted. If the field width is greater than the number of characters needed, the field will be padded with the fill character to the specified width, as described above. If the field width is less than the number of characters needed, the width will be extended. The field width represents the minimum field width; it cannot be used to provide truncation to a maximum field width. For wide character output the width is still measured in characters, not in bytes.
Sets the ``field width'' format state of stream s to newwidth, and returns the old value. The default value is 0. The field width is reset to zero automatically after every formatted insertion or extraction. It must therefore be reset for each operation requiring a field width. See also the manipulator setw in manip(3CC4).
User-defined format flags and variables are provided for derived classes which may need their own. Once allocated for a class, the flags and variables are reserved for the duration of the program; several independent classes may allocate their own flags and variables without conflict.
This static member function returns a long with one previously unallocated flag bit set. This value may then be used as a flag, for example, in calls to setf, for class-specific purposes. At least 16 bits are available for allocation. When no bits are available, this function returns zero.
This static member function returns a previously unused index into an array of words. A word is big enough to contain a long or a void*. This index may then be used with functions iword or ipword to get a reference to a reserved status variable.
When i is an index value returned by a call to ios::xalloc, these functions return a reference to the ith user-defined status variable (word) for class s. Function iword returns the reference typed as a long, and function ipword returns the reference typed as a void*. Note: Do not depend on the returned reference being stable for an indefinite period. In particular, any call to xalloc() may invalidate a previous reference.
Returns a pointer to the streambuf associated with the stream. This is part of the construction of a stream, and the buffer class object is not normally changed. This function may be used to get at streambuf functions directly, given a stream object.
A stream may be ``tied'' to one ostream, kept track of by the ``tie'' stream variable. Whenever a stream needs to acquire more input or flush its output, the tied stream, if any, is flushed first. For example, cin is initially tied to cout, so that pending output, such as a prompt, will be flushed before new input is attempted. This function sets the tie variable of stream s to the ostream pointed to by input parameter osp, and returns the old value of the tie variable. The sequence
ostream* oldosp = s.tie(0); ... do something ... s.tie(oldosp);
will untie a stream while some work is done, then restore the previous tie.
Returns the current value of the ``tie'' variable. (See above.)
If C stdio and C++ stream operations are performed on the same standard file, synchronization problems will occur. Since each style of I/O will have its own buffering, I/O will not occur in the order of program execution. To solve this synchronization problem, call this static function prior to doing any I/O to any of the standard streams cin, cout, cerr, or clog. This function resets the standard streams to use stdiobufs. I/O via stdio and streams will then be synchronized. There is a substantial performance degradation compared to using just buffered stream I/O or just buffered stdio. See stdiobuf(3CC4). Note: sync_with_stdio is needed only when doing I/O to the same standard input, output, or error file. You may use exclusively stdio input functions on stdin and exclusively stream output functions on cout with no difficulty.
A manipulator may be used apparently as an inserted or extracted object, but really only changes the state of the stream. See manip(3CC4) for more information. Several manipulators are predefined for use with streams.
These set the conversion base of stream s to 10.
These set the conversion base of stream s to 8.
These set the conversion base of stream s to 16.
This extracts and discards whitespace from stream s. See istream(3CC4).
Inserts a newline into stream s and flushes the stream. See ostream(3CC4).
Inserts a null character (`\0') into stream s to end the string. See strstream(3CC4).
Flushes the stream s. See ostream(3CC4).
Additional manipulators become available when you include <manip.h>. See manip(3CC4)
printf (1) , filebuf (3CC4) , fstream (3CC4) , ios.intro (3CC4) , istream (3CC4) , manip (3CC4) , ostream (3CC4) , printf (3C) , sbufprot (3CC4) , sbufpub (3CC4) , ssbuf (3CC4) , stdiobuf (3CC4) , strstream (3CC4) , stream_locker (3CC4) , stream_MT (3CC4)
C++ Library Reference, Chapter 3, "The Classic iostream Library" and Chapter 4, "Using Classic iostreams in a Multithreaded Environment."